Basic Operation - Siemens LC97F Series User Manual And Installation Instructions

Basic operation

7 Basic operation
7.1 Switching on the appliance
Press ⁠ .
▶
a The appliance starts at fan setting 2.
7.2 Switching off the appliance
Press ⁠ .
▶
7.3 Selecting a fan setting
Press ⁠ or ⁠ .
▶
7.4 Switching on intensive mode
If particularly strong odours or vapours develop, you
can use intensive mode.
Press repeatedly until
▶
a After approx. 6 minutes, the appliance automatically
switches to fan setting 3.
7.5 Switching off intensive mode
To select a fan setting of your choice, press ⁠ .
▶
7.6 Switching on the boost function
The boost function is a short-term maximum power set-
ting which can be activated in any fan setting.
Press ⁠ .
▶
a After approx. 20 seconds, the fan automatically
switches back to the fan setting that was previously
set.
7.7 Switching on the fan run-on
During the fan run-on, the appliance continues to run
for a short time and then switches off automatically.
Switching on the fan run-on, variant 1
Press ⁠ .
▶
a The fan run-on starts at fan setting 1.
a The fan automatically switches off after approx. 10
minutes.
Switching on the fan run-on, variant 2
Press until appears on the display.
▶
a The fan run-on starts at fan setting 1.
a The fan automatically switches off after approx. 10
minutes.
7.8 Switching off the fan run-on
Switching off the fan run-on, variant 1
Press ⁠ .
▶
Switching off the fan run-on, variant 2
Press ⁠ .
▶
1
Depending on the appliance specifications
appears on the display.
7.9 Switching on the lighting
The lighting can be switched on and off independently
of the ventilation system.
Press ⁠ .
▶
7.10 Setting the brightness
Press and hold until the required brightness is
▶
reached.
7.11 Switching on emotionLight Pro
You can switch on the emotionLight Pro independently
of the ventilation system.
Press ⁠ .
▶
7.12 emotionLight Pro - Setting the
1
brightness
Press and hold until the required brightness is
▶
reached.
7.13 emotionLight Pro - adjusting the
1
colour
Requirement: The appliance is switched off.
Press ⁠ .
1.
Press ⁠ or repeatedly until the required colour is
2.
set.
7.14 Setting the PowerBoost position
On some appliances, the filter cover can be adjusted to
an intermediate position. The intermediate position can
be used to eliminate particularly strong cooking smells
and large amounts of steam.
Take hold of the filter cover in the centre and open it
▶
carefully.
7.15 Saturation indicator
If the grease filters or odour filters are saturated, cor-
responding symbols flash after the appliance is
switched off.
Clean the saturated grease filters and, in doing so, ob-
serve the cleaning instructions in these instructions.
Change the saturated odour filters and observe the in-
structions in the accompanying instructions.
If odour filters can be regenerated, follow the instruc-
tions in the accompanying instructions.
7.16 Setting the saturation indicator
The saturation indicator must be adjusted depending
on the filter used.
Requirement: The appliance is switched off.
To set circulating-air mode (non-regenerable filter),
1.
press and hold and
play.
Basic operation en
1
until appears on the dis-
7