Table of Contents
Advertisement
en Before using for the first time
Before using for the first time
6 Before using for the first time
Configure the settings for initial start-up. Clean the ap-
pliance and accessories.
6.1 Setting an operating mode
Your appliance is set to air extraction mode by default.
Basic operation
7 Basic operation
7.1 Switching on the appliance
Press
.
▶
a The appliance starts at fan setting 2.
7.2 Switching off the appliance
Press
.
▶
7.3 Selecting a fan setting
Press , or .
▶
7.4 Switching on intensive mode
If particularly strong odours or vapours develop, you
can use intensive mode.
Additional functions in the Home Connect app
8 Additional functions in the Home Connect app
You can find these functions in the Home Connect app:
8.1 Intelligent hood control
With the appropriate hob and the Home Connect app,
cooking data is supplied continuously and the appli-
ance uses this to automatically adjust the fan setting
and to automatically switch the appliance on and off.
8.2 Performance profile
In the Home Connect app, you have the option to set
your personal performance profile. You can choose
between the noise-optimised or performance-optimised
performance profile.
8.3 Filter saturation
You can set the saturation indicator in the Home Con-
nect app depending on the filter used.
8.4 Cooktop-based Hood Control
You can connect your appliance to a Home Connect-
compatible hob and, in this way, control the functions
of your appliance via the hob.
1
Available depending on software version. Further information on availability can be found on the website.
8
Note: When using it in circulating-air mode, you require
additional accessories.
When using it in circulating-air mode, set the operat-
▶
ing mode.
→ "Filter saturation", Page 8
To switch on intensive mode, press .
▶
a After approx. 6 minutes, the appliance automatically
switches to fan setting 3.
7.5 Switching off intensive mode
Reset to the required fan setting.
▶
7.6 Switching on the lighting
The lighting can be switched on and off independently
of the ventilation system.
Press
.
▶
7.7 Setting the brightness
Press and hold
until the required brightness is
▶
reached.
8.5 Fan run-on
The fan run-on removes remaining odours and is used
to dry the odour filter after the cooking process.
8.6 Interval ventilation
In order to regularly ventilate your kitchen, you can use
the interval ventilation. With interval ventilation, the vent-
ilation system switches on and off in the selected set-
ting for the selected time.
8.7 Voice Control
You can control your extractor hood using voice control
with Amazon Alexa, for example.
8.8 Setting the colour temperature
In the Home Connect app, you can set the colour tem-
perature for the light from cold to warm.
1
Advertisement
Table of Contents
