Accessories; Basic Operation - Siemens LB79585MGB User Manual And Installation Instructions

en Accessories
6 Accessories
You can buy accessories from the after-sales service,
from specialist retailers or online. Only use original ac-
cessories, as these have been specifically designed for
your appliance.
Accessories vary from one appliance to another. When
purchasing accessories, always quote the exact
product number (E no.) of your appliance. → Page 10
You can find out which accessories are available for
your appliance in our catalogue, in the online shop or
from our after-sales service.
www.siemens-home.bsh-group.com
7 Basic operation
7.1 Switching on the appliance
Press ⁠ .
▶
a The appliance starts at fan setting 1.
7.2 Setting a fan level
Press ⁠ , ⁠ or
▶
7.3 Switching off the appliance
Press ⁠ .
▶
Note: If the fan is running at level 2 or 3, press
twice.
7.4 Switching on intensive mode
If particularly strong odours or vapours develop, you
can use intensive mode.
Press ⁠ .
▶
a After approx. six minutes, the appliance automatic-
ally switches to a lower fan setting.
Note: You can switch on the intensive mode directly in
off-mode. Once the six minutes has elapsed, the appli-
ance is switched off again.
7.5 Switching on the fan run-on
During the fan run-on, the appliance continues to run
for a short time and then switches off automatically.
Switch on fan setting 1, 2 or 3.
1.
Press and hold ⁠ .
2.
a The fan run-on is activated; the button for the set fan
setting flashes.
a The appliance automatically switches off after ap-
prox. 30 minutes.
6
⁠ .

Accessories

Standard odor filter
Standard recirculation kit
Clean Air Plus air recircu-
lation set
Clean Air Plus odor filter
(replacement)
LongLife air recirculation
set
Long Life odour filter (re-
placement)
7.6 Switching on intermittent ventilation
With intermittent ventilation, the appliance switches the
ventilation on and off at regular intervals.
Press and hold ⁠ .
▶
a The interval ventilation is activated,
a The interval ventilation switches off after 24 hours.
7.7 Switching off interval ventilation
Press and hold
▶
7.8 Switching on the lighting
The lighting can be switched on and off independently
of the ventilation system.
Press ⁠ .
▶
7.9 Setting the brightness
Press and hold until the required brightness is
▶
reached.
7.10 Switching off the lighting
Press ⁠ .
▶
7.11 Saturation indicator
The saturation indicator informs you when the grease
filters need to be cleaned.
After cleaning the grease filters, you should reset the
saturation indicator.
Resetting the saturation indicator
Requirement: The appliance is switched off.
Press and hold for three seconds.
▶
a The saturation indicator is reset.
goes out.
a
Order number
LZ55651
LZ55750
LZ11IXC16
LZ11IXB16
LZ11ITD11
LZ10ITP00
flashes.
or press ⁠ .