Table of Contents
Advertisement
5.3 Control panel, variant 2
You can use the control panel to configure all functions of your appliance and to obtain information about the operat-
ing status.
Switching the appliance on or off
Selecting the favourites function
Remote display
Resetting the filter saturation indicator
Settings area: 3 fan settings/2 intensive
modes
Before using for the first time
6 Before using for the first time
Configure the settings for initial start-up. Clean the ap-
pliance and accessories.
6.1 Setting an operating mode
Your appliance is set to air extraction mode by default.
Basic operation
7 Basic operation
7.1 Switching on the appliance
Press
.
▶
a The appliance starts at fan setting 2.
7.2 Switching off the appliance
Press
.
▶
7.3 Selecting a fan setting
Select the required fan setting in the settings area
▶
.
7.4 Switching on intensive mode
If particularly strong odours or vapours develop, you
can use intensive mode.
Select the required intensive mode in the settings
▶
area
.
a After approx. 6 minutes, the appliance automatically
switches to fan setting 3.
7.5 Switching off intensive mode
Reset to the required fan setting.
▶
Before using for the first time en
Switching automatic mode on or off
Switching emotionLight Pro on or off
Setting the emotionLight Pro colour
Switching the lighting on or off
Setting the brightness
Home Connect
Note: When using it in circulating-air mode, you require
additional accessories.
When using it in circulating-air mode, set the operat-
▶
ing mode.
→ "Filter saturation", Page 8
→ "Saturation indicator", Page 8
7.6 Setting the PowerBoost position
On the appliance, the glass front can be adjusted to an
intermediate position. The intermediate position can be
used to eliminate particularly strong cooking smells
and large amounts of steam.
Take hold of the glass front in the centre and open
▶
it carefully.
7.7 Switching on automatic mode
The optimum fan setting is set automatically using a
sensor.
Press
.
▶
7.8 Switching off automatic mode
Reset to the required fan setting.
▶
a The ventilation is automatically ended when the
sensor detects no further change in the room air
quality.
a Automatic mode runs for a maximum of four hours.
7.9 Sensor sensitivity
In automatic mode, a sensor in the appliance detects
the intensity of the cooking odours and roasting
odours. Depending on the setting of the sensor sensit-
7
Advertisement
Table of Contents
