Dolmar TM-98.14 H2D Operator's Manual page 110

24
EN
WARNING!
!
ensure safe conditions (
Whatever the conditions, always reduce the speed if you notice a drop in engine speed
– if you travel too fast compared to the amount of grass being cut, you will not be able
to mow the grass well.
Disengage the blades and raise the cutting deck as high as possible whenever you
need to get past an obstacle.
5.4.6 End of mowing
When you have finished mowing, disengage the blades, lower the engine speed and
ride the machine with the cutting deck raised as high as possible.
5.4.7 End of work
Stop the machine, move the throttle to «SLOW» and turn
off the engine by turning the key to «OFF».
When the engine has stopped, close the fuel stopcock (1)
( if fitted).
WARNING!
!
throttle on «SLOW» for 20 seconds before stopping
the engine.
WARNING!
!
unattended!
IMPORTANT
position when the engine is not running.
5.4.8 Cleaning the machine
After use, clean the outside of the machine.
When cutting on sloping ground, reduce your speed to
1.2 - 5.5).
To avoid backfire, position the
Always take out the ignition key before leaving the machine
To keep the battery charged, do not leave the key in the «ON»
HOW TO USE THE MACHINE
1