Inserting The Nano Sim And Microsd Cards - HTC Desire 19s User Manual

13 Unboxing and setup

Inserting the nano SIM and microSD cards

§ Use a standard nano SIM card. A modified card that is thicker than the standard nano SIM card
will not fit properly on the tray and may damage the card slot.
™
§ The microSD card is optional and sold separately.
1. Hold the phone face up.
2. Insert the tip of the tray eject tool that came with your phone—or a small bent paperclip—
into the tray eject hole.
When inserting the eject tool into the tray eject hole to remove the card tray, do not obstruct
the tray to avoid damaging the eject mechanism inside the slot.
3. Push the tip all the way into the hole until the tray ejects, and then pull the tray out.
4. Do the following to place your nano SIM and microSD cards into the tray:
With the gold contacts facing down, place two nano SIM cards into the SIM 1 and SIM 2
holders of the tray. Make sure to align the cut-off corners to the notches on the holders.
When you need to use a microSD card, remove your second nano SIM card and then place the
microSD card on the SIM 2/SD holder. You cannot have both the second nano SIM card and
the microSD card inserted at the same time.
Both SIM 1 and SIM 2 cards can be 4G LTE cards.
To find out how to set the preferred card for your
mobile data connection, see
nano SIM cards with Dual network manager
page 18.
Managing your
on