Louver Direction - Carrier Toshiba MMY-MUP0721FT6P-UL Owner's Manual

6

Louver direction

■
Individual louver (Select wind direction for each air outlet)
You can set the wind direction for each outlet of indoor units that have 4-way air discharge.
NOTE
• This function may not be available, depending on the model of the indoor unit.
• This function can only be set while the air conditioner is operating.
▼
4-way air discharge type
Electrical control
Receiver
box
installation
position
Refrigerant
pipe
Drain pipe
NOTE
• For models that "Individual louver" is not available, the message "No function" is displayed.
• Push [ ] or [ ] while swinging to stop the louver and cancel swinging, push [
an wind direction.
• For group connections, refer to the Owner's Manual for the wired remote control.
• " " is displayed when "Louver lock" is set. That louver cannot do "Individual louver". Refer to "Louver lock
(Fixing the angle of the louvers)"
25-EN
1140902101_EN FR ES.indb 13 1140902101_EN FR ES.indb 13
1
In "Menu", select "Individual louvers", and
push [ Set/Fix]
2
Push [ ] and [ ] to select louvers
Louver 1 Louver 2 Louver 3 Louver 4 All louvers
3
Push [ ] and [ ] to select wind
direction
For details, refer to "Changing the wind direction".
4
Push [ Return]
Return to "Menu".
▼
Compact 4-way air discharge type
Receiver
Electrical control
installation
box
position
Drain pipe
Refrigerant pipe
] or [ ] again to select
– 13 –
■
Louver setting
(Selecting the type of swing or fixing the louvers)
NOTE
This function may not be available, depending on the model of the indoor unit.
Swing type
You can select from 3 types of swing operation: "Standard", "Dual", or "Cycle".
NOTE
• For models that "Louver setting" is not available, the message "No function" is displayed.
• Push [ Return] to not fi x the changes, so conditions are as before changes, and return to the "Louver setting"
screen.
• For group connections, refer to the Owner's Manual for the wired remote control.
1
In "Menu", select "Louver setting", and
push [ Set/Fix]
2
Push [ ] and [ ] to select "Swing
type", and then push [ Set/Fix]
3
In the "Swing type" screen, push [ ] and
[ ] to select a mode
Regarding "Swing type", refer to the Installation
Manual of the indoor unit.
4
Push [ Set/Fix]
Return to the "Louver setting" screen.
5
Push [ Return]
" " is displayed.
When doing group connections, the screen for
selecting units is displayed, so push [ Return]
to display " " .
11/14/23 7:07 PM 11/14/23 7:07 PM
26-EN