Carrier Toshiba MMY-MUP0721FT6P-UL Owner's Manual page 9

■
Main screen
This screen is for confirming or changing settings that are used every day, such as temperature, operating mode,
fan speed and wind direction.
You can check the current state according to the setting items on the bottom of the screen.
You can switch the setting items by pushing [
NOTE
• The temperature setting is changed in the main screen.
• Functions and items that cannot be set are not shown, according to the model.
• While changing settings, if you push [
main screen returns.
Switching between the detailed display and simple display (Main screen only)
You can change the main screen to the simple display, depending on the "Display mode" setting. For details on
changing "Display mode", refer to "Display setting" in "Initial setting" in the Installation Manual of wired remote
control.
The detailed display is set as the factory default setting.
Detailed display (Factory default setting)
Simple display
15-EN
1140902101_EN FR ES.indb 8 1140902101_EN FR ES.indb 8
] and [ ], and change them by pushing [ ] and [
Setting items
•
The currently selected item is highlighted in black.
• You can switch the items by pushing [ ] and [ ].
Return] or if there are no button operations for about 60 seconds, the
(*1)
In the simple display, only some icons are shown.
(*1)
*1: " Preparing to heat"
Displayed when "Heat" operation starts or when
the defrost cycle is operating.
While the icon is displayed, the indoor fan stops or
the "Fan" turns on.
" Preparing to operate"
This may be displayed on some models.
" Preparing to operate ventilation"
Displayed while the Heat recovery ventilation unit
is on standby.
While this is being displayed, the Heat recovery
ventilation unit remains stopped.
■
Icon list
].
Displayed when "Energy saving operation"
is "ON".
Displayed when remote control sensor is
set. (*1)
Displayed when "Night operation" is "ON".
Displayed when operations are locked by
central control. (*1)
Displayed when "Saving operation" is
"ON".
Displayed when the Bluetooth
"ON". Refer to the Owner's Manual of the
Bluetooth ® function regarding Bluetooth
functions.
Displayed when a check code occurs. (*1)
It reaches the set temperature, and
displayed while the room temperature is
maintained.
*1: Refer to the Installation Manual of the wired remote control.
– 8 –
Displayed when "Timer" is "ON".
Displayed when "Louvers lock" is set.
! Displayed when it is time for filter
maintenance.
Displayed when "Soft Cooling" operation
is "ON".
Displayed for about 3 seconds when the
operation mode is changed in the "Mode"
screen when the operation mode is
restricted.
® function is
Displayed when "Air purifier" function is
® "ON".
Displayed when a notice code occurs. (*1)
For details, contact your dealer.
It is displayed when a commercially
available ventilation unit connected to the
air conditioner is in operation.
EN
FR
ES
16-EN
11/14/23 7:07 PM 11/14/23 7:07 PM