4.2.6 Installing Intel
To install the Serial I/O Driver, follow the steps below:
1
Connect the USB DVD-ROM device to SG-G151 and insert the
driver disk.
2
Open the Serial IO folder where the driver is located.
3
Select Win10 2016 (64Bit) or Win10 2019 (64-Bit) for your OS
platform.
4
Click Setup.exe file for Win10 2016 (64Bit) driver installation
or SetupSerialIO.exe for Win10 2019 (64Bit) driver
installation.
5
Follow the on-screen instructions to complete the installation.
6
Once the installation is completed, shut down the system and
restart SG-G151 for the changes to take effects.
SG-G151 USER MANUAL
®
Serial I/O Driver Utility
Chapter 4 Software Utilities
Page: 4-9