3.5.23 BIOS RESET CONNECTOR
JP9: BIOS Reset Usage Connector
This connector is only for Protech's engineers. (Purpose: BIOS reset). Please do not
use this connector; otherwise, the system might be crashed.
3.5.24 LVDS BACKLIGHT CONTROL SELECTION
Jumper Name: JP7
Description: Jumper for selecting PIN4 (LVDS_BKLCTL) voltage of JINV1.
SELECTION
3.3V
5V
Note 1: Users can change the setting according to panel specification
Note 2: Please refer to PANEL INVERTER CONNECTOR for more details about
pin definition of JINV1.
SG-G151 USER MANUAL
JUMPER SETTING
1-2
(Default Setting)
2-3
Chapter 3 System Configuration
JUMPER ILLUSTRATION
JP7
JP7
1
1
Page: 3-24