Table of Contents
Advertisement
4.2.5 Installing LAN Driver Utility
Enhanced with LAN function, SG-G151 supports various network
adapters. To install the LAN Driver, follow the steps below:
1
Connect the USB DVD-ROM device to SG-G151 and insert the
driver disk.
2
Enter the LAN Chip folder where the driver is located.
3
Select Win10 2016 (64Bit) or Win10 2019 (64-Bit) for your OS
platform.
4
Click Setup.exe file for driver installation.
5
Follow the on-screen instructions to complete the installation.
6
Once the installation is completed, shut down the system and
restart SG-G151 for the changes to take effects.
For more details on the installation procedure, refer to the
Readme.txt file that you can find on LAN Driver Utility.
SG-G151 USER MANUAL
Chapter 4 Software Utilities
Page: 4-8
Advertisement
Table of Contents
