Updating Your Charts Using The Garmin Express App; Software Updates - Garmin GPSMAP1222 Owner's Manual

Updating Your Charts Using the Garmin Express App

This chartplotter supports up to a 32 GB SD memory card, formatted to FAT32 with speed class 4 or higher. Use
of an 8 GB or larger memory card with speed class 10 is recommended.
Downloading the chart update may take up to a few hours.
You should use a blank memory card for chart updates. The update process erases the content on the card and
reformats the card.
1 Install the Garmin Express app on your computer
page 186).
2 Open the Garmin Express app on your computer.
3 Select your vessel and device.
4 If chart updates are available, select Chart Updates > Continue.
5 Read and agree to the terms.
6 Insert your chartplotter chart memory card into the computer.
7 Select the drive for the memory card.
8 Review the reformat warning, and select OK.
9 Wait while the chart update is copied to the memory card.
NOTE: Copying the update file onto the card may take from a few minutes up to a few hours.
10 Close the Garmin Express app.
11 Eject the memory card from the computer.
12 Turn on the chartplotter.
13 After the home screen appears, insert the memory card into the card slot.
NOTE: In order for the update instructions to appear, the device must be fully booted before the card is
inserted.
14 Select Update Software > Yes.
15 Wait several minutes while the update process completes.
16 When prompted, leave the memory card in place, and restart the chartplotter.
17 Remove the memory card.
NOTE: If the memory card is removed before the device restarts fully, the update is not complete.

Software Updates

You may need to update the software when you install a new device or add an accessory.
You can use the ActiveCaptain mobile app to update the device software
ActiveCaptain App, page 21).
You can also use the Garmin Express desktop app to update your chartplotter software
Software on a Memory Card Using Garmin Express,
This chartplotter supports up to a 32 GB SD memory card, formatted to FAT32 with speed class 4 or higher. Use
of an 8 GB or larger memory card with speed class 10 is recommended.
Before you update the software, you should check the software version installed on your device
Software Information, page 172). Then, you can go to garmin.com/support/software/marine.html, select See
All Devices in this Bundle, and compare the installed software version to the software version listed for your
product.
If the software version installed on your device is older than the version listed on the website, you should update
the software using the ActiveCaptain mobile app
Garmin Express desktop app
188
(Installing the Garmin Express App on a Computer,
page 189).
(Updating Software with the ActiveCaptain App,
(Loading the New Software on a Memory Card Using Garmin Express,
(Updating Software with the
(Loading the New
(Viewing System
page 21) or the
page 189).
Appendix