Table of Contents
Advertisement
8
Installation requirements
8.1. Heater installation
Install the heater according to figure 8.1. Peace of installation for the heater should be
flat. Position the heater's inlet vent in such a way to prevent absorption of vehicle/heater
exhaust gas in normal operating conditions. The distance between the walls/partitions and
the edge of the inlet vent shall be at least 100 mm (see figure 8.1). The distance between the
walls/partitions and the edge of the outlet vent shall be at least 250 mm. When assembling
or operating the heater, ensure that no foreign objects enter the inlet/outlet vents. Prior to
assembly, ensure availability dismantlement requirements, as this will permit easier
maintenance in future.
See figure 8.1b how to position mounting holes to install the heater into the motor
vehicle casing.
ATTENTION!!!
recommendations carefully. Install the heater horizontally as shown on the figure 8.1.
To
ensure
reliable
Figure 8.1 – Variants of installation of a heater.
performance,
10
follow
the
above
Advertisement
Table of Contents
