Connecting Coaxial (Rf); Using An Antenna - Vizio L15 User Manual

2.4 - Connecting Coaxial (RF)

There are several options for connecting your antenna or cable to your new L15 LCD TV –directly
to the TV or through your VCR. Based on your home theater configuration, you can decide which
option is the right one for you.
2.4.1 – Using an Antenna
You can decide to either connect the antenna directly to your TV or through a VCR based on how
you would like to set it up for your home.
2.4.1.1 - Connecting the Antenna to the TV
Installation:
1. Turn off the power to the LCD TV.
2. If your antenna has a round cable
(75 ohm) on the end, then you're
ready to connect it to the LCD TV
Monitor.
Note: If your antenna has flat,
twin-lead wire (300 ohm), you first
need to attach the antenna wires
to the screws on a 300- to 75-ohm
adapter.
3. Connect the antenna (or adapter)
to the TV jack on the rear of the LCD TV Monitor. If the end of the antenna wire is
threaded, screw it down tightly.
4. Turn on the power to the LCD TV.
5. Select "AIR" using the Video Source button on the remote control. Select "TV" using the
Audio Source button on the remote control.
2.4.1.2 – Connecting the Antenna through Your VCR
Installation:
1. Turn off the power to the LCD TV and
VCR.
2. Connect the "Output to TV" (RF Out
or Antenna Out) connector on the
rear of your VCR to the TV connector
on the rear of your LCD TV.
3. Turn on the power to the LCD TV and VCR.
4. Select "AIR" using the Video Source button on the remote control. Select "TV" using the
Audio Source button on the remote control.
5. Select Channel 3 or 4 to match the channel selected on the rear of your VCR.
Note:
a) If you have an off-air antenna or cable TV, connect the off-air antenna or TV cable to
the RF connector on the rear of your VCR.
b) Make sure the antenna or cable TV is correctly grounded.
Version - 4/5/2005 14
www.vizioce.com
VIZIO L15 User Guide