1.10.1 - Key Remote Control Functions...10 1.10.2 - Insertion of Batteries in the Remote Control...12 1.10.3 - Remote Control Range...12 1.10.4 - Precautions for the VIZIO Universal Remote Control ...12 Chapter 2 - Connecting Components...13 2.1 - Which Video Connection Should I Use? ...13 2.2 - Connecting Your DVD Player...14...
Congratulations on your VIZIO L30 WGUe 30” LCD Television purchase. Thank you for your support of VIZIO and its LCD Television product line. The L30 WGUe is a precise electronic product and you should read the following instructions carefully to maximize the performance of the product.
1.3 - Opening the Package • The VIZIO L30 WGUe is packaged in a carton together with other standard accessories. Any optional accessories are packed separately in another carton. • The weight of the LCD display is approximately 42.1 lbs. Due to the size and weight of the product, it is suggested that it be handled by a minimum of 2 persons.
• Do not place the L30 WGUe LCD TV on an unstable cart, stand, or table. If the L30 WGUe LCD TV falls, it can injure a person and cause serious damage to the appliance. Use only a cart or stand recommended by the manufacturer or sold with the L30 WGUe LCD TV.
VIZIO L30 WGUe User Guide 1.6 - Television Antenna Connection Protection External Television Antenna Grounding If an outside antenna or cable system is to be connected to the LCD TV, make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges.
1.7 - Package Contents VIZIO L30 WGUe LCD TV VIZIO Universal Remote Control Component Y/Pb/Pr Cable (green, blue, and red connectors) Audio Cable (red and white connectors) DVI cable Power Cord This User Guide IMPORTANT: Save the original box and all the packing material for future shipping needs.
7. Input – This button switches between the available input sources in the following sequence: VGA, DVI, HDTV YPbPr, DVD, AVI, AV2/S, and TV. When the on-screen display (OSD) is active, this button accepts an OSD menu item. Version - 4/7/2005 VIZIO L30 WGUe User Guide...
8. AV Out - Connect the video and audio from the LCD TV to an external device, i.e., an external amplifier or secondary TV. This output only supports S-video, AV1 and AV2 equipped with A/V inputs. It does not support YPbPr, YCbCr, TV or RGB. Version - 4/7/2005 VIZIO L30 WGUe User Guide...
1.10 - VIZIO Universal Remote Control The VIZIO Universal Remote Control is a comprehensive remote that can be used to control up to four different components. The remote control button functions are explained on the following pages. VIZIO Universal Remote Control Button Description...
CBL – This button selects a programmed cable TV set-top box or selects a programmed satellite TV set-top box. VCR – This button selects a programmed VCR. TV – This button selects a programmed TV. Pre-programmed for the VIZIO L30 WGUe LCD TV. Number Button Pad – These buttons select a channel or password.
Page 12
Sleep – Press this key to select the sleep options. User can adjust the sleep timer in 5 minute increments. VGA – This button selects a connected VGA display. TV – This button selects a programmed TV. Pre-programmed for the VIZIO L30 WGUe LCD TV. Note: The remote control layout is for reference only.
The effective range of the remote control is approximately 32 feet (10 meters) from the front of the receiver window, 30º to the left and right, 20º up and down. 1.10.4 - Precautions for the VIZIO Universal Remote Control •...
Chapter 2 - Connecting Components 2.1 - Which Video Connection Should I Use? The VIZIO L30 WGUe LCD TV has five different ways to connect your video equipment from a basic one to the most advanced for digital displays. Connection...
2.2 - Connecting Your DVD Player You have several options for connecting your DVD player to your new L30 WGUe LCD TV - DVI, Component, S-Video, and Composite inputs. Based on your home theater configuration, you can decide which option is the right one for you.
7. Select DVD using the INPUT button on the front of the LCD TV. Note: Refer to your DVD player user manual for more information about the video output requirements of the product. Version - 4/7/2005 VIZIO L30 WGUe User Guide...
A/V In group. If you are using AV2, then please make sure you connect the audio in the AV2/S group. b) Refer to your DVD player user manual for more information about the video output requirements of the product. Version - 4/7/2005 VIZIO L30 WGUe User Guide...
Use TMDS signals conforming to DVI standards. The TMDS input is a single link input. b) To maintain the display quality, use a DVI cable from VIZIO that is 10 meters or less. Installation: 1. Turn off the power to the LCD TV and HDTV Set-Top Box.
5. Select AV2/S using the INPUT button on the front of the LCD TV. Note: Refer to your VCR or video camera user manual for more information about the video output requirements of the product. Version - 4/7/2005 VIZIO L30 WGUe User Guide...
2.5 - Connecting Coaxial (RF) There are several options for connecting your antenna or cable to your new L30 WGUe LCD TV - directly to the TV or through your VCR. Based on your home theater configuration, you can decide which option is the right one for you.
R (red color) and L (white color) audio output connectors in the A/V Out group in the rear of your LCD TV. 3. Turn on the power to the LCD TV and receiver or amplifier. Version - 4/7/2005 VIZIO L30 WGUe User Guide...
VESA 1280 x 768 at 60 Hz. Please refer to the graphic card’s user guide for additional information on how to set the timing mode. b) Refer to your computer user manual for more information about the video output requirements of the product. Version - 4/7/2005 VIZIO L30 WGUe User Guide...
Note: The Channel ▼/▲ buttons on the front of the TV do not work if you are watching a program using HDTV input. To make additional adjustments to your LCD TV, please see “Section 3.4 Adjusting Basic LCD TV Settings” on page 23. Version - 4/7/2005 VIZIO L30 WGUe User Guide...
3.3 - Preparing the LCD for Wall Mounting The VIZIO L30 WGUe can either be kept on the base stand or mounted to the wall for viewing. If you choose to mount the L30 WGUe to the wall, please follow the instructions below for removing the base stand.
Menu button on the LCD TV or on the remote control to cycle through the main menu options. 7. Press the Exit button on the remote control to exit the OSD completely. Version - 4/7/2005 VIZIO L30 WGUe User Guide...
Color Temp. – Adjusts the intensity of the colors in the picture. A “cool” or low color temperature is good for watching movies or for watching programs in a darkened environment. A “warm” or high color temperature is good for daylight viewing like sporting events. Version - 4/7/2005 VIZIO L30 WGUe User Guide...
Page 27
IR Lockout - Locks the LCD TV so it cannot be controlled using the remote control. The user must use the buttons on the LCD TV to control the television. Factory Reset - Resets all settings to the factory default. Version - 4/7/2005 VIZIO L30 WGUe User Guide...
Page 28
PIP TV Channel - Changes the PIP channel if the source is set to TV. Use the Sub CH (-/+) buttons on the remote control to change the channel up or down. For additional information regarding the PIP options, see 3.5.3.2 - Picture-in-Picture (PiP) Mode, page 29. Version - 4/7/2005 VIZIO L30 WGUe User Guide...
DVD in widescreen mode and at high volume, and then watched TV in standard mode and low volume. When you switch back to DVD input, the viewing mode will return to widescreen and your volume will be high. Version - 4/7/2005 VIZIO L30 WGUe User Guide...
Page 30
PIP sub-picture program, press SWAP on the remote control. If you press SWAP again, it will return the program to the main picture. Version - 4/7/2005 PiP Source AV2/S HDTV 480i 480i 480i 480i 480i 480i 480i VIZIO L30 WGUe User Guide...
10. Press ▼ button to highlight BLOCKING ENABLE, then press ◄ or ► button to toggle the blocking enable to yes. 11. Press the EXIT button the remote control to exit the OSD menu when you are finished. Version - 4/7/2005 VIZIO L30 WGUe User Guide...
4. Press the EXIT button on the remote control to hide the sleep timer display. Your sleep timer is now running in the background. To turn off the sleep time using the remote control, press the SLEEP button repeatedly until Off appears. Version - 4/7/2005 VIZIO L30 WGUe User Guide...
3.6 - Remote Control Operation 3.6.1 - Programming the VIZIO Universal Remote Control You can program the remote control to work with up to four different components. Listed below are the steps for programming your TV, VCR, Cable Box and DVD Player.
Page 34
“Searching for Component Codes”, page 34. b) Sometimes a code listed will only include limited functions. Try other codes that may include more functionality. Version - 4/7/2005 VIZIO L30 WGUe User Guide...
3. Press the component button that you want (VCR) once, and then press the component button that you are reassigning (AV2) once. The AV2 button is now reassigned and can be programmed as a VCR component button. See “Programming the VIZIO Universal Remote Control”, page 32.
Press MUTE on the remote control again, so that MUTE disappears from the screen Check your audio settings, your TV audio may be set to SAP or minimum Press the Volume + (Up) key on your remote control Make sure that headphones are not connected VIZIO L30 WGUe User Guide...
Page 37
The LCD TV remembers the volume level from the last time you used a particular input (AV1, AV2/S, DVD, HDTV, and TV). The LCD TV remembers the viewing mode from the last time you used a particular input (AV1, AV2/S, DVD, HDTV, and TV). VIZIO L30 WGUe User Guide...
Page 38
To use this function, press the “ZOOM” key on the RCU and cycle among the available options. VIZIO L30 WGUe User Guide...
3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. It is the responsibilities of the user to correct such interference. Version - 4/7/2005 VIZIO 320A Kalmus Drive Costa Mesa, CA 92626 Web: www.vizioce.com BASE/BS Electric Appliance Control Act VIZIO L30 WGUe User Guide...
Before you ask for warranty service, read your User Manual. You might avoid a service call. For Technical Support, visit WWW.VIZIOCE.COM, Call (714) 668-0588 For VIZIO LCD Displays or E-mail Techsupp@vinc.com...