Vivitar Vivicam 2010 User Manual page 17

6. PC-Cam mode
7. Frequency Setting﹕
8. Force flash
Press the Power/Mode button nine times. The LCD display
will be as shown on the left. Connect your camera to the
computer with the USB cable.
Press the Power/Mode button ten times. The LCD display
will be as shown on the left. Press the shutter button to
confirm. You can set the frequency according to the
frequency of local power mains.
Press the Power/Mode button eleven times. The LCD
display will be as shown on the left. Press the shutter
button to confirm. You can set the frequency according to
the frequency of local power mains.
Press the Select button once. The LCD display will be as
shown on the left. Press the shutter button to confirm.
13