Vivitar VIVICAM 5118V2 User Manual

Vivitar VIVICAM 5118V2 User Manual

Vivitar digital camera user manual

Advertisement

ViviCam 5118v2 Digital Camera

User Manual

© 2009-2011 Sakar International, Inc. All rights reserved.
Windows and the Windows logo are registered trademarks of Microsoft Corporation.
All other trademarks are the property of their respective companies.

Advertisement

Table of Contents
loading

Summary of Contents for Vivitar VIVICAM 5118V2

  • Page 1: User Manual

    ViviCam 5118v2 Digital Camera User Manual © 2009-2011 Sakar International, Inc. All rights reserved. Windows and the Windows logo are registered trademarks of Microsoft Corporation. All other trademarks are the property of their respective companies.
  • Page 2: Table Of Contents

    Table of Contents Introduction ... 2 What‟s Included ... 2 Parts of the Camera ... 3 Initial Camera Setup ... 4 Main Camera Modes ... 8 Camera Technical Specifications ... 9 Computer System Requirements – WINDOWS OS ... 10 Computer System Requirements – MAC OS ... 10 Powering the Camera On/Off ...
  • Page 3: Introduction

    Thank you for purchasing this camera. Everything you need to take quality digital photos and videos is included with your camera. Vivitar makes capturing those special moments as easy as possible. Please read this manual carefully first in order to get the most out of your digital camera.
  • Page 4: Parts Of The Camera

    Parts of the Camera 1. Power Button 2. Shutter Button 3. LCD Screen 4. LED 5. Zoom Out 6. Zoom In 7. MODE button 8. SET button 9. Scene / Left Button 10. Flash / Up / Slide Show 11. Delete / Right Button 12.
  • Page 5: Initial Camera Setup

    Initial Camera Setup Installing the Batteries  Insert 2 AA (1.5V) batteries. Alkaline batteries recommended (not included). Turning On the Camera Installing the Memory Card  SD Memory card (up to 32GB) needed for normal use. Using the Camera Accessing the menu Selecting the modes...
  • Page 6 When powering the camera ON for the first time the camera will take you through the INITIAL CAMERA SETUP. Powering the Camera ON Batteries Make sure the batteries have been inserted properly into your digital camera, according to the polarity shown inside the battery compartment. Use 2x AA (1.5v) batteries.
  • Page 7 Setting the Camera Language You will first be prompted to select a language for the camera. The Language selection menu will appear. Select the language of your choice by pressing the UP and DOWN direction control buttons. Then press the SET button to confirm the selection. After selecting a language, you will be asked if you would like to continue with the initial camera setup.
  • Page 8 button to confirm the selection. Next you will be asked to choose the default ViviLink social network for Videos. Press the UP or DOWN buttons to highlight the desired default social network and press the SET button to confirm the selection. After the ViviLink Video option is confirmed the camera is now ready to use.
  • Page 9: Main Camera Modes

    Main Camera Modes Your camera has different modes for the various camera functions. You can switch modes by pressing the MODE button on your camera after the camera has been powered ON. Photo Capture Mode Use this mode to capture pictures with your camera. This is the default mode when the camera is powered ON.
  • Page 10: Camera Technical Specifications

    Camera Technical Specifications Image Sensor CMOS Sensor 2592x1944(5M) / 2048x1536(3M) /1920x1080(2M-HD) / Image Resolution 640x480(VGA) Video Resolution 640X480 pixels (30 fps), 320X240 pixels (30 fps) File Format JPEG/AVI Internal Memory 1 Test Photo Use Only External Memory SD Card (up to 32GB) LCD Display 1.5 Inch TFT Lens...
  • Page 11: Computer System Requirements - Windows Os

    Computer System Requirements – WINDOWS OS To be able to download photos and videos to your PC using the Vivitar Experience Image Manager Software, you will need the following minimum configuration:  Microsoft® Windows XP with Service Pack 3, Windows Vista with Service Pack 1 or Windows 7 ...
  • Page 12: Powering The Camera On/Off

    Powering the Camera On/Off  Make sure the batteries have been inserted properly into your digital camera. If your camera comes with a rechargeable lithium battery, make sure it is fully charged before the first use.  Make sure an SD card has been inserted into your camera. (SD card up to 32GB - SD Card not included) Powering the camera ON Press the...
  • Page 13: Navigating The Menus

     When the camera is first powered ON, the Photo Capture Mode will be active.  The icons that appear on the LCD screen are the best default settings so that you can begin to capture and enjoy clear quality photos. To change the active camera mode, make sure the camera is powered ON and press the MODE button.
  • Page 14: Photo Capture Mode

    Photo Capture Mode The Photo Capture mode allows you to capture pictures with your digital camera. Taking a Picture While in Photo Capture mode, use the LCD display on the back of the camera to direct the camera at the scene you would like to capture. Press the T/Zoom In and W/Zoom Out buttons to zoom in/out if desired.
  • Page 15 Photo Capture Mode Quick Function Buttons Your digital camera has a four-directional pad that functions as Quick Function buttons: Button Function Scene Selection – Opens the Scene menu Left Flash Options – Toggles the Flash options appearing on the LCD Delete –...
  • Page 16 Flash Options There are several Flash options available on your camera. The options appear on the Photo Capture Mode LCD screen in sequence. To change the Flash mode, press the UP Quick Function button until you arrive at your desired settings.
  • Page 17 Macro Switch MACRO ON: Your camera contains a Macro Switch that allows you to manually enable or disable the Macro mode on your camera. While using the Macro mode, you can capture images at close range (15 ~ 30 cm). To turn the Macro mode ON, slide the Macro Switch up on the side of your camera to the flower icon ...
  • Page 18 Photo Capture Mode Menus The following are the menus that appear in your camera‟s Photo Capture Mode:...
  • Page 19 Scene Menu The Scene Menu allows you to choose scene settings that let your camera to adapt properly to your current environment. Note: When selecting the HIGH SENSITIVITY Option, by default the camera switches off the FLASH automatically (if it‟s ON) to optimize the picture quality. If however, you would like to override it and manually turn ON the flash –...
  • Page 20 Press the MODE button to exit the menu and return to your previous mode. An icon reflecting your selection will display on the LCD screen. Remember that this setting will be saved by your camera until you manually change the setting or restore the camera‟s default factory settings.
  • Page 21 Press the LEFT or RIGHT direction control buttons to scroll and select the Self-Timer menu. Press the UP or DOWN direction control buttons to scroll through the menu options. Press the SET button to select and save the desired option. selected option icon will appear on the selected item.
  • Page 22 Color Effect Menu You can choose to add a color effect to the images taken with your camera. Press the SET button to open the menus for the current mode. Press the LEFT or RIGHT direction control buttons to scroll and select the Color Effect menu.
  • Page 23 Light Exposure Menu The Light Exposure setting helps you control the amount of light that enters your camera‟s lens. This setting should be adjusted when the environment is lighter or darker than normal. When the environment has more light than is needed, reduce the exposure setting (by using the negative - count) to reduce the amount of light allowed into the lens by your camera.
  • Page 24 Press the SET button to select and save the desired option. selected option icon will appear on the selected item. Press the LEFT or RIGHT button to select the next menu item. Press the MODE button to exit the menu and return to your previous mode. An icon reflecting your selection will display on the LCD screen Remember that this setting will be saved by your camera until you manually change the setting or restore the camera‟s default factory settings.
  • Page 25 Language Menu You can select your camera‟s language setting by selecting the desired language from the Language menu. Press the SET button to open the menus for the current mode. Press the LEFT or RIGHT direction control buttons to scroll and select the Language menu. Press the UP or DOWN direction control buttons to scroll through the menu options.
  • Page 26 Remember that this setting will be saved by your camera until you manually change the setting or restore the camera‟s default factory settings. To Set the Date and Time: Press the SET button to open the menus for the current mode. Press the LEFT or RIGHT direction control buttons to scroll and select the Date/Time menu.
  • Page 27 Auto Power Off Menu You can use the Auto Power Off feature in order to conserve you camera‟s battery life. The designated time represents when your camera will automatically power off. When the camera sits idle for the designated period of time, the camera will shut off completely and will need to be powered on again with the power button before the next use.
  • Page 28 Remember that this setting will be saved by your camera until you manually change the setting or restore the camera‟s default factory settings. Format Memory Card Menu You can use the Format Memory Card menu to delete all of the content that is currently on your camera‟s memory card.
  • Page 29 You will be asked to confirm the resetting to the factory default settings.  Select “No” to exit the menu and return to the previous mode without resetting to the default settings.  Select “Yes” and press the SET button to proceed with the reset. You will then automatically exit the menu and return to the previous mode with the digital camera settings set to the Factory Default Settings.
  • Page 30: Photo Playback Mode

    Photo Playback Mode The Playback Mode allows you to review and edit photos and videos that you‟ve already taken with you camera.  When you first turn on the camera, the camera will be in Photo Capture mode by default. ...
  • Page 31 Photo Playback Mode Quick Function Buttons Your digital camera has a four-directional pad that functions as Quick Function buttons. Quick Function Button Left Right Down Other W/Zoom out Function Displays the PREVIOUS image Views all the Photos as a Slide Show with 3, 5 or 10 second intervals.
  • Page 32 Photo Playback Mode Menus The following are the menus that appear in your camera‟s Photo Playback Mode: Delete Menu While in the Playback Mode, you can delete pictures from your camera through the Delete menu. View the photo you would like to delete. Press the SET button to open the menus for the Photo Playback mode.
  • Page 33 ViviLink Menu The ViviLink technology allows you to quickly and easily upload your camera‟s photos and videos to the social networks of your choice with the accompanying Vivitar Experience Image Manager application. Press the SET button to open the menus for the current mode.
  • Page 34 Press the LEFT or RIGHT button to select the next menu item. 10) Press the MODE button to exit the menu and return to your previous mode. Rotate Menu Use this menu to rotate the pictures that you‟ve taken with your camera. Press the SET button to open the menus for the current mode.
  • Page 35 Print This Photo Menu You can use the Print Photos menu to print the photos that are on your camera directly to a Pictbridge compatible printer. Scroll through your pictures and find the one you would like to print. Press the SET button to open the menus for the current mode. Press the LEFT or RIGHT direction control buttons to scroll and select the Print This Photo menu.
  • Page 36: Video Capture Mode

    Video Capture Mode The Video Capture Mode allows you to capture videos with your digital camera. When the camera is first powered ON, the camera will be in Photo Capture Mode. Press the MODE button once to access the Video Capture Mode. Taking a Video While in Video Capture Mode use the LCD display to direct the camera at the scene you would like to capture.
  • Page 37 Video Capture Mode Quick Function Buttons Your digital camera has a four-directional pad that functions as Quick Function buttons. Quick Function Button Left Right Down Other Shutter MODE Function Scene Selection - Opens the Scene menu Light Exposure – Opens the Light Exposure menu Delete - Opens the „Delete This Video‟...
  • Page 38 Video Capture Mode Menus The following are the menus that appear in your camera‟s Video Capture Mode:...
  • Page 39 Scene Menu The Scene Menu allows you to choose scene settings that let your camera to adapt properly to your current environment. Press the SET button to open the menus for the current mode. Press the LEFT or RIGHT direction control buttons to scroll and select the Scene menu. Press the UP or DOWN direction control buttons to scroll through the menu options.
  • Page 40 Image Quality Menu The Image Quality menu allows you to select the desired quality level of the images taken by your camera. Keep in mind that images with a higher image quality level will also take up more memory on your camera. Press the SET button to open the menus for the current mode.
  • Page 41 An icon reflecting your selection will display on the LCD screen. Remember that this setting will be saved by your camera until you manually change the setting or restore the camera‟s default factory settings. Color Effect Menu You can choose to add a color effect to the images taken with your camera. Press the SET button to open the menus for the current mode.
  • Page 42 An icon reflecting your selection will display on the LCD screen Remember that this setting will be saved by your camera until you manually change the setting or restore the camera‟s default factory settings. Light Exposure Menu The Light Exposure setting helps you control the amount of light that enters your camera‟s lens. This setting should be adjusted when the environment is lighter or darker than normal.
  • Page 43 ISO Menu The ISO menu allows you to set the level of sensitivity that your camera has to light in the surrounding environment. When the ISO level is increased, the image sensor in your camera will be more sensitive to light and allow you to capture images in lower-light situations. The higher sensitivity to light however, may reduce the quality of the images that are taken.
  • Page 44 Remember that this setting will be saved by your camera until you manually change the setting or restore the camera‟s default factory settings. Date/Time Menu When you capture an image with your camera, the image will include a time stamp with the date and time that the image was taken.
  • Page 45 For each field in the menu, use the UP and DOWN navigation buttons to set the date and time. When you have finished setting the date and time, press the SET button to save your settings and return to the previous mode. Press the MODE button to exit the menu without saving your settings and return to your previous screen.
  • Page 46 Press the SET button to open the menus for the current mode. Press the LEFT or RIGHT direction control buttons to scroll and select the Frequency menu. Press the UP or DOWN direction control buttons to scroll through the menu options. Press the SET button to select and save the desired option.
  • Page 47 Firmware (Factory Default Settings) Menu Use this menu to view the Firmware version on your camera or to reset your camera settings to the Factory Default Settings. Press the SET button to open the menus for the current mode. Press the LEFT or RIGHT direction control buttons to scroll and select the Firmware menu. The “Default Setting”...
  • Page 48: Video Playback Mode

    Video Playback Mode The Playback Mode allows you to review and edit photos and videos that you‟ve already taken with you camera.  When you first turn on the camera, the camera will be in Photo Capture mode by default. ...
  • Page 49 Press the SET button to enlarge the image full size. Once the selected video is full size you can play and view the video. Video Playback Mode Quick Function Buttons Your digital camera has a four-directional pad that functions as Quick Function buttons. Quick Function Button Function Displays the PREVIOUS image Left...
  • Page 50 ViviLink Menu The ViviLink technology allows you to quickly and easily upload your camera‟s photos and videos to the social networks of your choice with the accompanying Vivitar Experience Image Manager application. Press the SET button to open the menus for the current mode.
  • Page 51 selected option icon will appear on the selected item Press the MODE button to exit the menu and return to your previous mode. An icon will appear on the image with the selected ViviLink destination site. Remember that the ViviLink feature is deactivated by default. A ViviLink destination will only be assigned to a photo or video if you manually set it from this menu or from the ViviLink menu in Capture mode (accessible with the ViviLink Quick-Function button in Capture mode).
  • Page 52: Installing The Software

    Installing the Software You must be connected to the internet to install and run the Vivitar Experience Image Manager software. Insert the installation CD into your CD-ROM drive. The installation screen should automatically open. On PC: The Vivitar Experience Image Manager Installer window appears. If the window does not appear, open the application‟s CD/DVD drive and click on “Setup.exe”...
  • Page 53: Connecting The Camera To The Computer

    On PC and Macintosh: Click the “I accept the terms of this license agreement” and then click “Next” to continue. 10) On PC only: Let the “Vivitar Experience Image Manager” installer create the folder to where the program will be installed, and then click “Install”.
  • Page 54: Getting Photos And Videos From Your Camera To Your Computer

    Getting Photos and Videos from your Camera to Your Computer An SD card needs to be inserted. Do not disconnect the cable during transfer. Doing so will cancel the transfer of any files on their way to your computer. Select the “Get Images” button from the Main menu. The “Get Images from device”...
  • Page 55: Get Started

     Edit images using automatic and manual tools  Use automatic “Geotagging” with built in Google Maps For more details on how to use the Vivitar Experience Image Manager open the Help file or click the “Take a Tour” button on the application’s Home page.
  • Page 56: Transfer Media From My Camera To My Computer Manually (Using Macintosh)

    Transfer media from my camera to my computer manually (Using Macintosh) Use the USB cable that came with your camera to connect your camera to your computer. MSDC appears on the LCD. The camera‟s device icon appears on the desktop. Click on the device icon and open the DCIM folder and the folder inside to view the media files.
  • Page 57: Sakar Warranty Card

    Sakar Warranty Card This warranty covers for the original consumer purchaser only and is not transferable. Products that fail to function properly UNDER NORMAL USAGE, due to defects in material or workmanship will be repaired at no charge for parts or labor for a period of one year from the time of purchase.
  • Page 58: Technical Support

    Technical Support For technical support issues please visit our website at www.vivitar.com. You can find manuals, software and FAQ‟s at the website. Can‟t find what you are looking for? E-mail us at support@vivitar.com and one of our technical support team members will answer your questions.

This manual is also suitable for:

V5118Vivicam 5118

Table of Contents