Panasonic TX-1703MA Series Operating Instructions Manual page 9

Multi-scan color crt display
Hide thumbs Also See for TX-1703MA Series:
Table of Contents

Advertisement

Available languages

Available languages

Storing of Data
|
1. Factory Preset Timings
The display unit is shipped from the factory with the following eight timing modes.
Polarity of synchronizing
Display area
Signal
TX-1703MA
| TX-1703MA Series | TX-2013MA Series | TX-2103MA Series
e
e
e
a
a
Display
image
element
Data
Horizontal
frequency
Vertical
frequency
1
Sync on Green or
MAC-II | 640 X 480 | 35.0kHz | 66.7 Hz
|
211mm
Composite Sync (-/-)
5 |SUPER-
800 X600 | 35.16kHz | 55.2Hz
224mm
262mm | 376mm.
8514/A | 1024 x 768 | 35.52kHz | 66.95 Hz
a
When the same signal as one of the above preset timings is input, the display area of the image is
displayed as indicated in the above table.
2. Custom Timings
O
In addition, this unit is provided with 8 blank storage areas for saving timings different from those
listed above.
O
If any of the following four signals differ, the timing can be registered as different data.
1. Horizontal frequency
2. Vertical frequency
3. Polarity of horizontal synchronizing signal
4. Polarity of vertical synchronizing signa!
O
The contents of the data which can be registered by pressing the memory button is as follows:
Horizontal frequency
Vertical frequency
Polarity of horizontal synchronizing signal
Polarity of vertical synchronizing signal
Horizontal size
Horizontal position
Vertical size
Vertical position
NOR
UN

Advertisement

Table of Contents
loading

Table of Contents