Table of Contents
Advertisement
Available languages
Available languages
E
Connection of AC Power Supply
€
lf the AC power voltage is within the range of 90-264 V, it can be used regardless of the differ-
ence of line frequency (50 Hz or 60 Hz). There is no voltage select switch between the AC 100 V
system and the AC 200 V system.
Precautions:
O
In order to use the display unit safely, use a power cable that is properly grounded.
O
The attached power cable is accepted by both the American UL standard and the the Ca-
nadian CSA standard.
O
For safety, use the power cable which conforms with the safety standard of each country.
USAT
Lalla
UL
laly
crai
ero
ai
CENELEC < HAR D
Canada
Sciare
CSA
Germany
lola
rara
VDE
MADEN:
alri
ani
Electric Appliance Control Act
FIANCO | coreana
NF
oO AC PLUG CONNECTION (For U.K.)
Connect your AC plug with Mains lead of the set as follows.
IMPORTANT
The wires in this Mains lead are coloured in accordance with the following cord:
Blue:
Neutral
Brown:
Live
Green and Yellow:
Ground
As the colours of the wires in the Mains lead of this apparatus may not correspond with the
coloured marking identifying the terminals in your plug proceed as follows.
e
The wire which is coloured Green and Yellow must be connected to the terminal in the
plug which is marked by the letter E or By the Safety ground symbol =
or coloured
Green or Green and Yellow.
e
The wire which is coloured blue must be connected the terminal which is marked with the
letter N or coloured black.
e
The wire which is coloured brown must be connected to the termina! which is marked with
the letter L or coloured red.
Ground terminal
AC Power Cord
(Green and Yellow)
Warning:
Please don't connect Brown wire and Blue wire to the ground Terminal.
lT
Advertisement
Table of Contents
