Panasonic TX-1703MA Series Operating Instructions Manual page 8

エエ nr の nm
Configuration Function and usage Instruction ・
Turn a display unit power supply ON/OFF at the display unit.
Power supply switch (D (I
O When the switch is pressed, the power is supplied, and the
pilot LED lights. When the switch is pressed again, switch re-
turns to the original position, the power is cut off, and the
pilot LED goes out.
Adjust the shade of the image.
O When the knob is turned clockwise, the shade becomes
greater, and counterclock-wise, the contrast of picture dec-
reases.
O Adjust the shade so that you can view the image comfor-
tably.
RM
Contrast adjusting
knob
Adjust the brightness of the image.
O When the knob is turned clockwise the image becomes
brighter, and further and fully clockwise, the background
glimmers slightly.
O Adjust the illumination according to the brightness of the
room so that you can view the screen comfortably.
Brightness adjustment
knob
Degauss the shadow mask of the CRT to adjust the color shade
of the image.
O Use this switch when changing the direction of the display
unit during use, and when the color of the image is shaded.
if you are going to press the button again, wait 5 minutes or
more to obtain a sufficient demagnetization effect.
O Degauss is also automatically activated as soon as the pow-
er is supplied even if the Degaussing switch is not pressed.
Degaussing switch
Configuration Function and How to Use
Horizontal positioning When these buttons are pressed the horizontal position of the
button image can be adjusted.
O Rightside ............... The image moves to the right.
O Leftside ................. The image moves to the left.
When these buttons are pressed, the horizontal size of the image
can be adjusted.
O Rightside ............... Horizontal size of the image be-
comes larger.
E Leftside ica Horizontal size of the image be-
comes smaller.
Horizontal size
adjustment button
When these buttons are pressed, the vertical position of the im-
age can be adjusted.
© Rightside ............... The image moves upward.
O Leftside ................. The image moves downward.
Vertical positioning
button
Vertical size adjust- When these buttons are pressd, the vertical size of the image
ment button can be adjusted.
O Rightside ............... Vertical size of the image becomes
larger.
Left side ................. Vertical size of the image becomes
smaller.
When this button is pressed, the adjusted position and size of the
image can be stored.
© Eight timing modes can be registered.
The unit is shipped from the factory with eight modes already
registered, for a total of 16 timing modes.
Memory button
Note: —
O Do not press two or more buttons on the contro! panel simultaneously, this can cause a
malfunction.
© When the button on the control panel is pressed continuously for more than approximate-
ly one second, the variation becomes larger.