Table of Contents
Advertisement
WARNING ‒ Risk of fire!
Fatty deposits in the grease filters may catch fire.
Clean the grease filters regularly.
▶
ATTENTION!
The grease filters may become damaged if they are
squeezed in the dishwasher.
Do not squeeze the grease filters.
▶
Note: When cleaning the grease filter in the dish-
washer, light discolouration may occur. This discoloura-
tion has no effect on the performance of the metal
grease filters.
Requirement: The grease filters have been removed.
→ "Removing the grease filter", Page 12
Observe the information regarding the cleaning
1.
agents.
Place the grease filters loosely into the dishwasher.
2.
Do not clean heavily soiled grease filters with
utensils.
Use special grease solvent for stubborn dirt. You
can obtain grease solvents from customer service
or the online shop.
Start the dishwasher.
3.
Select a temperature of no more than 70 °C.
Allow the grease filters to drain.
4.
10.9 Removing the grease filter cartridge
Note: The appliance frame is sensitive. Remove the
▶
grease filter cartridges vertically. Do not pull the
grease filter cartridges over the appliance frame.
Remove the grease filter cartridges.
Troubleshooting
11 Troubleshooting
You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting
after-sales service. This will avoid unnecessary costs.
WARNING ‒ Risk of injury!
Improper repairs are dangerous.
Repairs to the appliance should only be carried out
▶
by trained specialist staff.
If the appliance is defective, call Customer Service.
▶
→ "Customer Service", Page 15
10.10 Cleaning the grease filter cartridge
Requirement: The grease filters have been removed.
→ "Removing the grease filter", Page 12
1.
Clean the grease filter cartridge.
You can clean the grease filter cartridges by hand
or in the dishwasher.
2.
Observe the information regarding the cleaning
agents.
10.11 Fitting the grease filters
Press .
1.
a The glass panel moves halfway down and the
grease filter cartridges are transported to the top.
Insert the grease filter into the grease filter cart-
2.
ridges.
To avoid causing damage, do not bend the grease
filters.
Press .
3.
a The glass panel and the filter cartridges move
4.
downwards.
a The appliance flap closes and the appliance
switches off.
Reset the saturation indicator.
5.
→ "Resetting the saturation indicator", Page 9
WARNING ‒ Risk of electric shock!
Incorrect repairs are dangerous.
Repairs to the appliance should only be carried out
▶
by trained specialist staff.
Only use genuine spare parts when repairing the
▶
appliance.
If the power cord of this appliance is damaged, it
▶
must be replaced by trained specialist staff.
Troubleshooting en
13
Advertisement
Table of Contents
