Memory Cartridge Slot; Memory Cartridge Switch - Roland GR-700 Owner's Manual

[4])Memory Cartridge
The supplied Memory Cartridge M-16C
can be used to save the data in memory
and recall it at anytime you like. That is
it works just like the memory of the
19
GR-700, retaining 64 different patches.
Also, the data in the cartridge is fully
supported by battery for about 5 years.
a. Memory Cartridge Slot @)
*Be sure to insert the cartridge into this
slot securely as shown on the right.
Product Number
on this side
a —
b. Memory Cartridge Switch @2 |
Pressing this switch wiil alternately turn
the GR-700 to Internal Memory and
Cartridge Memory. When the GR-700 is
in the Cartridge mode, the indicator lights
up and the Display will show " C "onits
left. All of Recall, Edit and Write func-
tions are available by this Memory
Cartridge, and the necessary operation
is exactly the same as for internal.
*xEven if the GR-700 is turned to
Memory Cartridge mode, the patch in
the internal Memory remains as it is.
Therefore, it is possible to copy a patch
in the Internal Memory to the Memory
Cartridge or copy a patch in the
Memory Cartridge into Internal Me-
mory. in either case, it is necessary to
set the Protect Switch of the Cartridge
to OFF.
Indication of Cartridge mode
Protect Switch