Manual tuning
(not possible in the RDS and TP range)
Manual tuning button va @ — higher frequencies
Manual tuning button & @ — lower frequencies
Pressing button briefly
— frequency changes in steps
Pressing button longer
- frequency changes rapidly
Only in the FM range (VHF) on stations without
RDS:
— Display @@ shows the frequency in 0.1 MHz
steps.
— Pressing
the
manual
tuning
button
va 3
changes the frequency tuned to in 0.05 MHz
steps.
Example:
Display (6:
Manual tuning
button va @3:
7.80|/
> 97.85|— 97.80]
After the frequency shown
in the display
changes to the next higher frequency, you must
briefly press the manual tuning button va @3 one
more time to ensure that the frequency in the dis-
play @6 is the same as the frequency tuned to.
86
Storing stations in memory
using the station buttons @9:
Memory positions for RDS programmes
6x RDS
(RDS programmes)
6x RDS-TP
(RDS programmes with traffic news
broadcasts)
Memory positions for stations/frequencies
6xU
(VHF waveband)
6xM
(mediumwave)
6xK
(shortwave)
6xk
(longwave)
@ Select the range (press buttons briefly) with
RDS button 49, TP button @, FM button @ or
AM button @.
@ Tune in station/frequency using
~ manual tuning buttons va (3, 2 @ (not possible
in the RDS and TP range) or
— station search rocker button {> @ or
— RDS-LEARN memory.
@ Store the stations tuned to with the station but-
tons 9.
Press the desired station button and hold until
the station tuned to becomes audible again.
~ The station is stored in the memory; if replaces
any station previously allocated to the button in
the same range.
lf the supply voltage is disconnécted, the contents
of the memory remain intact.