Airflow Rate; To Adjust The Airflow Rate; Airflow Direction - Daikin ATXM20A2V1B User Reference Manual

6 | Operation

6.4 Airflow rate

6.4.1 To adjust the airflow rate

6.5 Airflow direction

User reference guide
24
Cooling operation Heating operation Automatic
18~32°C 10~30°C
Note: When using drying or fan only mode, you cannot adjust the temperature.
4 Press to stop operation.
Result: disappears from the LCD. The operation lamp goes off.
1 Press to choose:
5 airflow rate levels, from " " to " "
Automatic airflow rate operation
Indoor unit quiet operation. When the airflow rate is set to " ",
the noise from the unit will be reduced.
INFORMATION
▪
If the unit reaches the temperature setpoint in cooling or heating mode, the fan
will stop operating.
▪
When using drying operation mode, you CANNOT adjust the airflow rate setting.
1 Press to change the airflow setting as follows:
When. Adjust the airflow direction as desired.
What. The system directs the airflow differently, depending on the user selection
(swinging or fixed position). It does so by moving horizontal blades (flaps) or
vertical blades (louvers).
Setting
Vertical automatic swing
Horizontal automatic
swing
+ 3-D airflow direction
[—]
operation
18~30°C
Airflow direction
Moves up and down.
Moves from side to side.
Moves alternately up and down and from side
to side
Stays in a fixed position.
Drying or Fan only
operation
—
ATXM-A
Daikin room air conditioner
4P518786-13K – 2023.06