Adjusting The Airflow Rate - Daikin FTKZ25VVMV Operation Manual

Adjusting the Airflow Rate

Tips for saving energy
Keeping the temperature setting at a moderate level helps save energy.
• Recommended temperature setting for cooling: 26.0-28.0°C
Cover windows with a blind or a curtain.
• Blocking sunlight and air from outdoors increases the cooling effect.
Keep the air filters clean.
• Clogged air filters cause inefficient operation and waste energy. Clean them once in about every 2 weeks.
If you are not going to use the air conditioner for a long period, for example in spring or autumn, turn off the circuit
breaker.
• The air conditioner always consumes a small amount of electricity even while it is not operating.
You can adjust the airflow rate to increase your comfort.
„ To adjust the airflow rate setting
Press .
• Each pressing of
AUTO
• When the airflow is set to "
become quieter.
• In the quiet operation mode, the airflow rate is set to a weak level.
• If the temperature dose not reach the desired point, change the airflow rate setting.
• If COOL/DRY operation is started with airflow settings on "AUTO", the indoor unit will
initially deodorise, which functions to suppress any internal odours.
As a result, the indoor unit will not emit air immediately. (Wait for about 1 minute.)
• At smaller airflow rates, the cooling effect is also smaller.
changes the airflow rate setting in sequence.
Indoor unit quiet
", quiet operation starts and noise from the indoor unit will
Basic Operation
Airflow rate 1-5 (Low to High)
Page 35
16