Daikin ATXM20A2V1B User Reference Manual page 39

To connect the wireless LAN to your home network
To connect using the WPS button
ATXM-A
Daikin room air conditioner
4P518786-13K – 2023.06
a Daikin eye
b Partly green
c Red, orange or blue
Daikin eye colour alternates between
partly green and...
Red
orange
blue
4 Press to exit the menu.
Result: The display will return to the default screen.
The wireless adapter can be connected to your home network using the:
▪ WPS button (Wi-Fi Protected Setup) on the router (if present),
▪ The SSID (Service Set Identifier) and the KEY (password) - located on the unit.
1 On home screen menu, hold
operating.
Result: The SP menu appears. is blinking.
2 Change to the SP menu by pressing
(5 sec.)
3 Press to confirm the selection.
Result: is blinking. The Daikin eye colour alternates between orange and
partly green.
4 Press the WPS button on your communication device (e.g. router) within
approximately 1 minute. Refer to the manual of your communication device.
Result: The Daikin eye colour alternates between blue and partly green.
b
c
a
...then wireless adapter is...
not connected
running and ready to connect to the
home network via WPS button; see
connect using the WPS
connected to the home network:
▪ via SSID + KEY.
or
▪ via the WPS button on the router.
for at least 5 seconds while the unit is not
once or repeatedly.
1×
6 Operation
|
"To
4
button" [ 39].
User reference guide
39