To Start/Stop Operation Mode And To Set The Temperature - Daikin ATXM20A2V1B User Reference Manual

6.3.1 To start/stop operation mode and to set the temperature

ATXM-A
Daikin room air conditioner
4P518786-13K – 2023.06
▪ Blow air in a room without heating or cooling
▪ Decrease the humidity in a room
What. The system operates differently, depending on the user selection.
INFORMATION
Operation modes: cooling, drying and automatic are NOT available for the heating
only version of the product.
Setting
Automatic
Drying
Heating
Cooling
Fan
Additional info:
▪ Outside temperature. The system's cooling or heating effect decreases when the
outside temperature is too high or too low.
▪ Defrost operation. During heating operation, frost might occur on the outdoor
unit and decrease the heating capacity. In that case, the system automatically
switches to defrosting operation to remove the frost. During defrosting
operation, hot air is NOT blown from the indoor unit.
1 Press one or more times to select the operation mode.
Result: The mode will be set as follows:
2 Press to start operation.
Result: and the selected mode are displayed on the LCD.
3 Press or one or more times to lower or raise the temperature.
The system cools down or heats up a room to
the temperature setpoint. It automatically
switches between cooling and heating if
necessary.
The system decreases the humidity in a room.
The system heats up a room to the temperature
setpoint.
The system cools down a room to the
temperature setpoint.
The system only controls the airflow (airflow
rate and airflow direction).
The system does NOT control the temperature.
: Unit is operating.
: Operation mode = Automatic
: Operation mode = Drying
: Operation mode = Cooling
: Operation mode = Heating
: Operation mode = Fan only
: Shows the set temperature.
6 Operation
|
Description
User reference guide
23