Daikin ATXM20A2V1B User Reference Manual page 40

6 | Operation
To connect using SSID and KEY number
To reset the connection setting to the factory default
User reference guide
40
INFORMATION
If the connection with your router is not possible, try procedure
SSID and KEY number" [
5 Press to exit the menu.
Result: The display will return to the default screen.
1 On home screen menu, hold
operating.
Result: The SP menu appears. is blinking.
2 Change to the SP menu by pressing
(5 sec.)
3 Press to confirm the selection.
Result: is blinking. The Daikin eye colour alternates between red and partly
green.
4 Open the ONECTA application on your smart device and follow the steps on
the screen.
Result: If the connection was successful, the Daikin eye colour alternates
between blue and partly green.
5 Press to exit the menu.
Result: The display will return to the default screen.
Reset the connection setting to the factory default in case you want to:
▪ disconnect the wireless LAN and the communication device (e.g. router) or smart
device,
▪ repeat the setting if the connection was unsuccessful.
1 On home screen menu, hold
operating.
Result: The SP menu appears. is blinking.
2 Change to the SP menu by pressing
(5 sec.)
3 Hold for at least 2 seconds to confirm the selection.
Result: is blinking. The Daikin eye colour alternates between red and partly
green. The setting is reset to the factory default.
4 Press to exit the menu.
Result: The display will return to the default screen.
4
40].
for at least 5 seconds while the unit is not
twice or
2×
for at least 5 seconds while the unit is not
twice or
2×
"To connect using
repeatedly.
repeatedly.
ATXM-A
Daikin room air conditioner
4P518786-13K – 2023.06