Configuring The Scanner - Visioneer OneTouch 7100 Installation Manual

C
ONFIGURING THE
When you first connect your scanner to a computer, the scanner's
software configures each OneTouch button with appropriate settings.
But, if you want to change the settings, you can reconfigure the buttons
by selecting new options from the Configuration dialog box. You
display the Configuration dialog box from either the shortcut menu or
the Button Panel.
To display the Configuration dialog box from the shortcut menu:
1. Right-click the scanner icon.
Scanner icon
The shortcut menu appears.
2. Choose Configure on the shortcut menu.
The Configuration dialog box appears. Click the tab that
corresponds to the button you want to configure.
C
ONFIGURING THE
S
CANNER
S 17
CANNER