Visioneer OneTouch 7100 Installation Manual page 12

8 V 7100 USB S
ISIONEER
I
CANNER NSTALLATION
2. Plug one end of the USB cable into an available USB port on the
computer.
3. Plug the other end of the USB cable into the scanner's USB port.
If the plug does not attach easily, make sure that you are plugging it
in correctly. Do not force the plug into the connection.
Some newer computers also have keyboards with USB ports. You
can plug the cable into the keyboard instead of the USB port on the
computer.
4. Plug the power adapter cable into the power jack on the back of the
scanner.
5. Plug the power adapter into an AC (wall) outlet.
The following diagram shows the scanner connected to a computer.
G
UIDE
USB