Advertisement
5
Drilling the Mower Deck
No Parts Required
Procedure
WARNING
Using a drill without proper eye protection
may allow debris to enter the eye, causing
injury.
When drilling, always wear eye protection.
1.
Electric models only: drill the 10 pilot holes in
the deck to a diameter of 9.8 mm (0.3875 inch)
as shown below.
1. Holes for right baffle
2. Holes for right kicker
3. Holes for center kicker
4. Holes for left kicker
2.
Gas models only: drill the 9 pilot holes in the
deck to a diameter of 9.8 mm (0.3875 inch) as
shown below.
Figure 9
5. Holes for left baffle
6. Holes for left baffle
7. Holes for the right baffle
1. Holes for right baffle
2. Holes for right kicker
3. Holes for center kicker
3.
Drill the 2 pilot holes to a diameter of 8.23 mm
(0.325 inch) as shown below.
1. Holes for center baffle
g453175
6
Figure 10
4. Holes for left kicker
5. Holes for left baffle
6. Holes for left baffle
Figure 11
g453176
g453178
Advertisement
