Advertisement
Figure 19
1. Right belt cover
2. Flange (left belt cover)
4.
Assemble the tensioner cover to the left belt
cover with the 2 flange-head screws that were
previously removed.
Figure 20
1. Flange-head screws (1/4
x 5/8 inch)
2. Tensioner cover
g270486
3. Flange-head screw (left
and right belt cover)
g270487
3. Left belt cover
12
Installing the Guard
Extension and Closing
the Engine Guard (Gas
Models Only)
No Parts Required
Installing the Guard Extension
1.
Install the extension guard as shown in
21. Torque the nuts to 20 to 25 N∙m (15 to 18
ft-lb).
1. Hex nut (5/16 inch)
2. Guard extension
2.
Install the belt guard as shown in
Torque the bolts to 20 to 25 N∙m (15 to 18 ft-lb).
14
Figure 21
3. Nut (5/16)
4. Carriage bolt (5/16 x 4
inches)
Figure
Figure
g288411
22.
Advertisement
