Advertisement
8
Installing the Baffles (Electric Models Only)
Parts needed for this procedure:
1
Left baffle
1
Center baffle
1
Right baffle
9
Carriage bolt (3/8 x 1 inch)
9
Locknut (3/8 inch)
Procedure
Loosely install the baffles to align the baffles with all the holes in the mower deck
1.
Position the right baffle into the mower deck.
2.
Loosely secure the right baffle to the right discharge plate using 1 carriage bolt (3/8 x 1 inch) and 1
locknut (3/8 inch) as shown in
3.
Loosely secure the right baffle to the baffle plate adapter using 1 carriage bolt (3/8 x 1 inch) and 1 locknut
(3/8 inch) as shown in
4.
Loosely secure the right baffle to the right mower deck divider and right baffle support using 2 carriage
bolts (3/8 x 1 inch) and 2 locknuts (3/8 inch) as shown in
5.
Position the left baffle in the mower deck.
6.
Loosely secure the left baffle to the left discharge plate using 1 carriage bolt (3/8 x 1 inch) and 1 locknut
(3/8 inch) as shown in
7.
Loosely secure the left baffle to the left mower deck divider and left baffle support using 2 carriage bolts
(3/8 x 1 inch) and 2 locknuts (3/8 inch) as shown in
8.
Position the center baffle into the mower deck.
9.
Loosely secure the center baffle to the right and left mower deck dividers and center baffle support using 3
carriage bolts (3/8 x 1 inch) and 3 locknuts (3/8 inch) as shown in
10.
Tighten all the locknuts.
Figure
15.
Figure
15.
Figure
15.
Figure
15.
Figure
15.
Figure
10
(Figure
15).
15.
Advertisement
