Bosch Professional GFA 18-H Original Instructions Manual page 8

OBJ_BUCH-3422-001.book Page 8 Friday, January 26, 2018 8:13 PM
8 | English
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Mounting
2 Torque presetting ring
3 Gear selector
4 Battery pack
5 Rotational direction switch
6 On/Off switch
7 Worklight
8 Mode selector switch
Technical Data
Hammer adapter with auxiliary handle
Article number
Cordless Screwdriver
Article number
No-load speed
Impact rate
Max. drilling dia. in concrete
Weight according to EPTA-Procedure
01:2014
Sound power level
Sound pressure level
Uncertainty
Vibration total value
Uncertainty
*depending on the battery pack being used
Noise/Vibration Information
Sound emission values determined according to
EN 60745-2-6.
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745-2-6.
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
1 609 92A 3YK | (26.1.18)
9 GFA 18-H, GHA FC2 hammer attachment
10 Locking ring
11 Handle (insulated gripping surface)
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Delivery Scope
Hammer adapter with auxiliary handle.
Application tools and other accessories shown or described
are not part of the standard delivery scope.
A complete overview of accessories can be found in our ac-
cessories program.
GFA 18-H, GHA FC2 GFA 18-H, GHA FC2
2 609 199 816
GSR 14.4 V-EC
FC2
3 601 JE1 0..
-1
min 0 –1600
-1
min 0 –4500
mm 10
kg 2.4 – 2.9*
dB(A) 97
dB(A) 87
dB 3
2
m/s 12
2
m/s 1.5
accessories, keep the hands warm, organisation of work pat-
terns.
Assembly
Changing the Tool
 Before any work on the machine itself (e. g. mainte-
nance, tool change, etc.) as well as during transport
and storage, remove the battery from the power tool.
There is danger of injury when unintentionally actuating
the On/Off switch.
Mounting the Adapter (see figure A)
Remove the application tool.
Insert the adapter into the mounting 1. Turn the locking ring
10 until it audibly engages.
Inserting the Application Tool into the Adapter
GFA 18-H, GHA FC2 (see figure B):
Insert the application tool all the way into the mounting 1.
Removing
GFA 18-H, GHA FC2 (see figure C):
Push back the locking sleeve and remove the tool.
GFA 18-H, GHA FC2
2 609 199 816 2 609 199 816
GSR 18 V-EC
FC2 GSR 18 V-60FC
3 601 JE1 1.. 3 601 JG7 1..
0 –1700 0 –1900
0 –4800 0 –5400
10 10
2.4 – 2.9* 2.4 – 2.9*
97 91.5
87 80.5
3
14
1.5 1.5
Bosch Power Tools
3
7