Package, Transportation, Storage; Package; Transportation; Storage - KEHUA TECH SPI-B X2 Series User Manual

8 Package, Transportation, Storage

8 Package, Transportation, Storage
This chapter mainly introduces the package, transportation and storage.

8.1 Package

The package of product is carton. When packing, pay attention to the placing direction requirements.
One side of carton, it should print warning icons, including keep dry, handle with care, up, stacking
layer limit, etc. The other side of carton, it should print the device model, etc. Print the logo of Kehua
company and device name on the front of carton.

8.2 Transportation

Pay attention to the warnings on the carton. Don't impact severely when transportation. In case of
damaging device, it should follow the placing direction that shows on the carton. Don't carry device
with the objects that inflammable, explosive, or corrosive. Don't put device in the open-air warehouse
when transshipment. Leaching and mechanical damage by rain, snow or liquid objects is prohibited.

8.3 Storage

When storing device, it should follow the placing direction that shows on the carton. The gap is 20cm
between the carton and ground and the clearance is at least 50cm from carton to wall, heat source,
cold source, windows or air inlet.
The storage environment temperature is -40℃～70℃. If storing or transporting device beyond the
working temperature, before startup, set it alone and wait for the temperature reaches to the range of
the working temperature and keep the status more than four hours. In warehouse, It's prohibited that
there has poisonous gas, objects that inflammable and explosive, corrosive chemical objects. Besides,
it shouldn't have too strong mechanical shaking, impact and strong magnetic field. Under the storage
conditions above, the storage period is six months. If it is beyond six months, it has to recheck..
PV Grid-tied Inverter SPI-B X2 Series (8K-25K)
56
User Manual