PV Grid-tied Inverter SPI-B X2 Series (8K-25K)
User Manual
Figure3-13 Hang the inverter to installation holder
Step 6
Fasten the inverter to the installation holder by the equipped stainless steel combination bolt M5*16
and then lock it, as shown in Figure3-14.
Figure3-14 Fasten the inverter
----End
3.5 Electrical Connection
3.5.1 Wire Requirements
The wiring terminals are located at the bottom of the inverter, as shown in Figure2-5 and Table2-2 .
The recommended wire specification is as shown in Table3-1.
19
3 Installation