Sony UDA-1 Service Manual page 80

UDA-1
REVISION HISTORY
Ver. Date
1.0 2013.09 New
1.1 2013.10 Addition of Chinese and Taiwan models
Change of Part No. for POWER CORD (US and Canadian models)
How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
e.g.) If a contact point is shown as
Procedure:
1. Press the [F] key while pressing the [Ctrl] key.
2. Input ">001Z" in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
Note: If you still see the original page, press the [Enter] key again.
Description of Revision
, follow the procedure below.
(SMR-13032)