1. Suspension frame
2. Steering gear case mount bolts
*
*
1. Wheel speed sensor
harness clamp bolt
3. Suspension frame bolts
2. Wheel speed sensor
* : Wheel side
harness clamp
SUSPENSION FRAME
REMOVAL
1) Hoist vehicle and remove wheels.
2) Remove suspension control arms (right & left), refer to Steps 2)
to 5) of SUSPENSION CONTROL ARM REMOVAL in this sec-
tion.
3) Remove steering gear case mount bolts.
4) Remove front differential (1) with its mountings.
Refer to SECTION 7E for dismounting front differential.
5) Remove wheel speed sensor harness clamp bolts and clamps
from suspension frame (if equipped with ABS).
6) Remove suspension frame bolts and suspension frame.
FRONT SUSPENSION (4WD) 3D1-19