Connecting And Securing Drain Hose - Hisense 9 Series User's Operation Manual

Do not dip the water supply hose with the Aqua stop system in water as it contains an electric
valve.
The water supply hose can be connected without a non-return valve.
When connecting the water supply hose, make sure to connect it in a way that allows adequate
and unobstructed water supply.

CONNECTING AND SECURING DRAIN HOSE

Feed the drain hose into a washbasin or a bathtub, or connect it directly to a drain (minimum drain
hose diameter 4 cm). The vertical distance from the floor to the end of the drain hose should be
60-100 cm. It can be attached in three ways (A, B, C).
20
The drain hose
end may be
placed over a sink or
a bathtub. Use a tie
strap to secure the
hose through the
elbow support to
prevent it from
slipping.
The drain hose
may also be
attached directly to
the sink drain. Do not
use a small sink. Pay
attention that the
drained water may
be hot.