Connecting Drain Hose To The Drain - Hisense WFMC6010E User's Operation Manual

Table of Contents

Advertisement

Ensure that:
All connections are tightly fixed.
Do not allow children to operate, crawl on, be near or inside your
washing machine.
Note that during the wash cycles, the surface temperature of the
porthole door may increase.
Close supervision of children is necessary when the appliance is
used near children.

4.6 Connecting drain hose to the drain

If the drain hose is installed as shown in the picture,
unhook it only from the right clip (see arrow) :
Connect the drain hose to the drain or hook
it over the edge of a sink by means of the
"U" bend.
Fit the "U" bend D, if not already installed, at the
end of the drain hose.
Notes:
If the washing machine is connected to an integrated
drainage system, ensure that the latter is equiped with
a vent to avoid simultaneous loading and draining of
water (siphoning effect).
Ensure that there are no kinks in the drain hose.
Secure the hose so that it cannot fall down. After
wash phase, machine will drain out hot water.
Small hand basins are not suitable.
To make an extension use a hose of the same
type and secure the connections with clips.
Fix the drain hose securely to prevent scalding
during machine drainage.
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents