Adjusting Side/Top Trim; Adjusting The Leveling Legs - Viking DFUD042 Installation Instructions Manual

ADJUSTING THE LEVELING LEGS

NOTE:
It may be necessary to install a wood trim above the dishwasher if the standard toe space is maintained or
you can raise the dishwasher to fit using the leveling legs.
Adjust the feet of the dishwasher with a 1/2" (1.3 cm) wrench to fit the
opening. The dishwasher may have a maximum inclination of 2 degrees
without affecting its performance.
When the legs are adjusted, tighten the locking nuts to the base pan.
Adjusting the side trim and top trim
To adjust:
Open the dishwasher door and remove the screws that attach the side and top trim to the dishwasher. Adjust the side
and top trim to the desired hole setting in the side and top trim and replace screws. Be sure to attach the side and top
trim from inside the dishwasher.
When using a 23 5/8" (60.0 cm) cutout, it will be necessary to remove the side trim.
Locking nut
Foot
10