Table of Contents
Advertisement
Trim Installation Options
(451 Models)
1a
Dishwasher ships with trim installed for flush install. If
needed, attach wiper gasket to dishwasher by pulling
protective film off adhesive back. Apply behind
hemmed edge of side trim.
1b
x6
To install dishwasher without trim, remove
If needed, attach wiper gasket to dishwasher by pulling
the 6 screws (3 per side) and remove trim.
16
2b
protective film off adhesive back. Apply to leading
edge of dishwasher frame. Trim gasket to fit.
Counter Balance Spring Adjustment
1
2
Disconnect cable from hook.
Increase
tension
3
Decrease
tension
Set counter balance spring connector in appropriate
location.
Note: For custom panel installation,
the door may require adjustment
to the preload of the counterbalance
springs. Follow these steps to
adjust the tension.
17
(if necessary)
2
1
Remove spring from dishwasher.
4
2
Reconnect cable to hook.
Advertisement
Table of Contents
