Maintenance - Chicco BABY HUG PRO 5 IN 1 Manual

Age range intended for use:from when your child
starts walking and is able to sit down and stand up by
himself (about 10/12 months, max. 15 kg).
• WARNING: Before using as a seat, remove the safe-
ty harness (crotch strap and waist belt) and position
them in the relevant spaces. Remove the toy bar or
position it behind the backrest.
• WARNING: The seat must be used with the backrest
fully raised.
• WARNING: Never leave the child unattended.
• WARNING: DO NOT PLACE this product near a win-
dow, as it may be used by a child as a step. Danger of
falling from the window.
• WARNING: Be aware of the risk of open fire and other
sources of strong heat in the vicinity of the product.
• WARNING: DO NOT PLACE this product near a win-
dow, as the strap of the roller shutter or the cords of
the curtains could strangle your child.
• WARNING: Do not use the product if any part is bro-
ken, torn or missing.
• WARNING: Do not use accessories or replacement
parts other than those approved by the manufacturer.
• WARNING: Only place it on flat and stable surfaces.
• WARNING: Check that the space in which chair will be
used is free of objects or furniture that may obstruct or
compromise correct use.
• Do not let your child stand up on the seat to avoid the
risk of falling.
• Do not allow more than one child at a time to sit on the
chair in order not to compromise its stability.
• This seat is intended solely for household use and on
dry surfaces.
• Do not make any modifications: any modification may
compromise its safety.
• Prolonged exposure to direct sunlight can cause the
fabric to fade. After prolonged exposure to high tem-
peratures, wait a few minutes before using the product.
• Never move the chair while the child is seated on it.
EN 17191: 2021
TIPS FOR CLEANING AND MAINTENANCE
• Please refer to the care label for instructions on wash-
ing the product:
Wash by hand in cold water at 30°C
Do not bleach
Do not tumble dry
Do not iron
Do not dry clean
• Check that the fabric and stitching are in good condi-
tion each time you wash it.
• Prolonged exposure to direct sunlight can cause the
fabric to fade.
CLEANING
Clean the plastic parts with a soft damp cloth. Never use
abrasive detergents or solvents. If the highchair comes
into contact with water, dry the metal parts to prevent
the formation of rust.

MAINTENANCE

• This product requires periodical maintenance.
• Cleaning and maintenance operations must only be
carried out by an adult.
• Periodically check the product for broken, damaged or
missing parts: if present don't use the product.
• To avoid friction that may compromise the correct
functioning of the product, ensure that all the moving
plastic parts located along the metal frame are free of
dust, dirt and sand.
• If necessary, lubricate the moving parts with dry sili-
cone lubricant.
• Store the product in a dry place.
COMPONENTS
The product is completely disassembled when pur-
chased; check that all of the components listed below
are present. If any part is missing contact ARTSANA's
CUSTOMER SERVICES.
The product and all of its components must always be
assembled by an adult.
A - Height adjustable pedestal frame
A1 - Four wheels with brakes
A2 - Central support
B - Seat frame
B1 - Seat frame fasteners
B2 – Seat supports
C - Seat structure
C1 - Front safety fastener
D - Tubular seat frame
E - Fabric (with shoulder straps)
F - Booster cushion
G - Toy bar
G1 - Light / sound game buttons
G2 - 3 soft toys
I - Upper fabric zips
L - Plastic clips
M - Height adjustment pedal
N - Backrest recline lever
N1 - Backrest recline lever release button
O – Crib release buttons from the frame (2x)
P - Handle for carrying (4x)
ASSEMBLY
The product is not assembled when purchased. To use
it, carry out the following assembly operations:
1. The first thing to do is assemble the "A1" wheels on
height adjustable base frame "A". To do this place the
frame on a rug or soft surface so as not to damage the
floor or frame. Assemble the 4 "A1" wheels inserting
the pins in the 4 holes under height adjustable base
frame "A" as shown in Figure 1.
WARNING: Fully insert the wheel pins into the holes in
the base. At this point the base can be rested on the
floor.
20