Cleaning And Maintenance; Care And Maintenance - Chicco Circus Manual

Hide thumbs Also See for Circus:

Manual (68 pages)

Table of Contents

Available languages

a long time, allow it to cool down

before let your child use it.

• WARNING: Prolonged exposure

to sublight can cause fading to the

fabric and materials colours.

• WARNING: Do not use this prod-

uct with temperature below 5°C or

on slippery and/or icy surfaces.

• WARNING: Do not use this prod-

uct as a sledge or raft in the water.

• WARNING: Always check that the

stoppers are fitted correctly and

show no sign of damage or tear.

• WARNING: When not in use, store

the baby walker in a suitable place,

away from contact with all weather

conditions and out of the reach of

children.

• WARNING: Do not allow oth-

er children to climb onto or play

without the supervision of an adult

near the baby walker.

COMPONENTS

A) Structure of the baby walker

B) Upholstered padded seat with semi-rigid backrest

C) 4 swivel wheels

D) 8 stoppers

E) Toy panel

(NOTE: The toy in the package may differ from the one

shown)

F) Fastening key for toy panel

FIRST ASSEMBLY

1. Turn over the structure of the baby walker (A). Attach the

front and rear wheels (C) in their slots (Fig. 1). Make sure

the pin has come to its limit: you will hear a click.

2. Fasten the stoppers (D) in the relevant slots (Fig. 2). Make

sure that the pins of all the stoppers have come to their

limit.

3. Bring the baby walker to position for use by turning the

wheels to the floor (horizontal plane); slowly lift the tray

as shown in (Fig. 3), by pulling it upwards until it clicks

into place in the desired position.

WARNING: Before putting the child in the baby walker,

make sure the button under the tray has reached its en-

gagement position (Fig. 4): an audible click indicates that

the button is locked.

4. Fit the padded seat plastic inserts (B) in the slots formed

along the top edge of the baby walker (Fig. 5A) and make

sure they are properly locked in the shown position (Fig.

5B). Then fasten the front pins (Fig. 5C).

BABY WALKER ADJUSTMENTS

WARNING: When opening, closing or regulating the baby

walker, make sure that your child is at a safe distance.

5. To adjust the seat height, after taking the child from the

baby walker, push the table upwards until it clicks into its

locked position (Fig. 6). To lower the height, hold the pin

under the table and turn it (Fig. 7), lower the table to the

desired position by sliding the pin. Upon release of the

pin, the tray automatically locks.

6. To close the baby walker, turn the pin under the tray (Fig.

8A) and lower the seat until it is completely closed (Fig. 8B).

WARNING: Do not close the baby walker with the child inside.

TOY PANEL

The toy panel has different activities to promote the child's

sensory, tactile and auditory development.

7. To fasten the toy to the frame, place it on the tray (Fig. 9).

To fasten it, push both keys upward (Fig. 10A) and turn

them as far as possible (Fig. 10B). To remove the toy, re-

peat the previous steps in reverse order (Fig. 11-12).

WARNING: This product must only be used under adult

supervision.

WARNING: Remove and keep out of reach of children any

hazards that might be a suffocation risk for the child such

as plastic bags and other components not belonging to the

toy (e.g. straps, fastenings etc.).

WARNING: Before using for the first time, check that the

product and all its components don't show signs of dam-

age caused by transportation. Check the product regularly

for signs of wear and damage. Keep all damaged parts out

of children's reach.

WARNING: Your child may be hurt if you do not follow the

instructions.