Table of Contents
Advertisement
3. INITIAL PRESETTING
3-1.
Please the power switch to "OFF".
Set the mode switch to "'Z" position.
- 4st entry code
Setting
=o
Remarks
This selects four functions.
a
This selects eight functions.
2nd entry code
(normally "2")
Setting
This selects the "00" key.
aa
This selects the "00" and "000" keys.
Code
entry (2 digits)
L —
ACCT
# ]
@
Standard: Keyboard 'Layout
Eight functions
CASH
:
OUT
~
CASH
IN
CASH
CHECK
Four
functions
@ Make:sure the entered codes are: printed on the journal,
'then turn the mode:switch back to "REG" penal
Turn power switch to "0 FF".
Set mode switch to 'Z" position:
Turn power switch to "ON".
Make sure the display is filled with zeroes.
Release the [1 Jand [ACCT #| keys.
_=ii-
Depress and hold down numeric key 7
[1] and [AccT # :
BE=2520
(1) Bank ID
® With reference to the character code table, input the
appropriate codes, within 8-digits (4 characters max.)
for the desired bank ID description.
@ Depress the
key.
Code setting
(within 8-digits)
ACCT #
(within 4 characters)
(2) Validation fuction key code
@
Input numeric code (character code table) within 4
digits (within 2 characters).
®@ Depress appropriate validation function key.
Code entry
Validation
(within 4 digits)
Function key
(within 2 characters)
(3) Setting of the Duplicate print codes
®@ Press the
key
@
Upon depression of the list key the machine goes into
the duplicate print symbol setting mode and a "0"
is
displayed on the 13th digit of the display.
®
in reference to Fig.1, enter on the keyboard the appro-
priate character codes for up to two seperate characters
'(actually four seperate key stroke entries), an example is
given below:
,
[KEYSTROKE]
[CHARACTER]
1 & SUB TOTAL
d
@
Press the validation
function
key that corresponds to
the code.
Validation
Function key.
Setting code
within 4 digits
(2 characters)
Bank ID
: not printed"
Deposit
: D
"MISCT
M4
Cashout
: CO
MISC2 : M2
Cash in
=: Cl
MISC3 : M3
Cash check
: CC
"MISC4
: M4
Advertisement
Table of Contents
