Panasonic DVCPRO AJ-D455P Service Manual page 81

5-11 Component Pb signal Level
Adjustment
BOARD
V IN (F5)
TP Component PB OUT
ADJ. Service Menu
TAPE -----
INPUT Analog Component Signal
(100% Color Bar with 7.5% Set-up)
bCAM Level
MODE EE
M. EQ Analog WFM
SPEC. Pb signal level (A): 933 ± 4mV
1. Open the SERVICE MENU. (Refer to SEC1
Service Information.)
2. Select the E00: V IN ADJUST and press the
"SET" button to open the V IN ADJUST MENU.
3. Select E-1 CMPNT ADJUST and press the "SET"
button to open the CMPNT ADJUST menu.
4. Adjust the E02 NENT PB GAIN so that the level
"A" is in the specification.
5. Close the menu.
Pb OUT
5-12.Component Pr Signal Level
BOARD
INPUT
MODE
M. EQ
SPEC.
1.
2.
3.
4.
5.
Pr OUT
A
ELE-24
Adjustment
V IN (F5)
TP Component PR OUT
ADJ. Service Menu
TAPE -----
Analog Component Signal
(100% Color Bar with 7.5% Set-up)
bCAM Level
EE
Analog WFM
Pr signal level (B): 933 ± 4mV
Open the SERVICE MENU. (Refer to SEC1
Service Information.)
Select the E00: V IN ADJUST and press the
"SET" button to open the V IN ADJUST MENU.
Select E-1 CMPNT ADJUST and press the "SET"
button to open the CMPNT ADJUST menu.
Adjust the E05 NENT PB GAIN so that the level
"B" is in the specification.
Close the menu.
B