Service Menu; Service Menu Operation Method - Panasonic DVCPRO AJ-D455P Service Manual

13. Service Menu

13-1. Service Menu Operation Method

1. Confirm that the "REMOTE/LOCAL" switch on the front panel is set to the "LOCAL".
2. Press the "MENU" button on the front panel to display the "SETUP-MENU".
3. When the "SETUP-MENU" is displayed, press the "MENU" button while pressing the "EJECT" button
and the "STOP" button. Then, the "SERVICE-MENU" is displayed.
4. Move the cursor "*" with the "
to I00.
5. If any of main items (A00, F00, G00, H00, I00) other than the RF adjustment (B00) and the V IN
adjustment (E00) is selected, the item setting screen of the selected main item is displayed by pressing
the "SET" button on the front panel.
6. For the RF adjustment (B00) and the V IN adjustment (E00), select the item on the Sub Screen, and then,
press the "SET" button. Then, the item setting screen of the selected item is displayed.
7. For both of the RF adjustment and the V IN adjustment, the previous screen can be displayed with the
"MENU" button.
8. The settings can be altered on the item setting screen by moving the cursor "*" with the "
" " buttons. Settings can be altered by pressing the "
operating procedures may be different depending on the selected item. Refer to the details of the service
menu.)
Sub screen
SERVICE-MENU:RF
NO.C00-
*E-1:CMPNT ADJUST
E-2:CMPST ADJUST
E-3:YC ADJUST
END
SET
Item setting screen
SERVICE-MENU:CMPNT
NO.E00
*E00:NENT Y GAIN -
E01:NENT Y OFS
E02:NENT PB GAIN-
E03:NENT PB OFS -
E04:NENT PB TMG -
E05:NENT RP GAIN-
E06:NENT RP OFS -
E07:NENT RP TMG -
END
DEFAULT operation screen
SERVICE-MENU:DEFAULT
NO.C-4 -
*SAVE
LOAD
INIT LOAD
END
" and "
E00 Main item screen
SET
MENU
B00
MENU
Sub screen 1
- 10
-10
- -79
55
-38
88
-64
-30
-85
C00
Sub screen 2
SET
MENU
C-4:DEFAULT
" buttons to select any main item among items from A00
SERVICE-MENU
NO.A00
*A00:SERVO ADJUST
B00:RF ADJSUT
E00:VIN ADJUST
F00:VIDEO ADJUST
G00:AUDIO ADJUST
H00:OTHER ADJUST
I00:BACKUP RAM INIT
END
SET
MENU
SERVICE-MENU:RF
NO.C00 -
*C00:PRO ADJUST
D00:DV ADJUST
END
SET
MENU
SERVICE-MENU:PRO ADJUST
NO.C-1 -
*C-1:REC ADJUST
C-2:RP ADJUST
C-3:PB ADJUST
C-4:DEFAULT
END
C-4:DEFAULT
INF-27
" and " " buttons. (Setting and
Other than
B00, E00
Item setting screen
SERVICE-MENU:SERVO
NO.A01 -
*A01:FG DC ADJ
SET
A02:T TORQUE
A03:S TORQUE
A04:PG SHIFT 25
1649
MENU
A05:T PHOTO
A06:S PHOTO
A07:TENSION
A08:X VALUE 25
Item setting screen
SERVICE-MENU:REC
NO.C01 -
*C01:REC CURR L
C02:REC FREQ L
SET
C03:REC CURR R
C04:REC FREQ R
C05:RE1 CURR
C06:RE2 CURR
MENU
C07:BPF FREQ
C08:XCAN MODE
C40:VITERBI MODE-
Other than
" and
0
OFF
0
0
1640
0
40
- 22
- 0
- 40
- 0
- 40
- 40
- HIGH
- ON
ON