Operation - IOGear GCS1602CC Quick Start Manual

Operation

• Click on the remote port selector button to switch between the two
connected USB-C devices. Port LED on top of GCS1602CC will light up,
indicating which port is selected and has KVM focus on.
• If you are experiencing any "no display" issue, press and hold the remote
port selector for 3 seconds to switch between 2 lane DP and 4 lane DP
modes. The port 1 and port 2 status LEDs flash once to indicate the
GCS1602CC is switched to 2 lane mode, and flash twice to indicate the
GCS1602CC is switched to 4 lane mode.
5