Table of Contents
Advertisement
On-screen Display (OSD) Operation
Trigger OSD
Simply press [Scroll Lock] [Scroll Lock] rapidly.
Note: This hotkey sequence can be changed to
[Ctrl] [Ctrl]. Please refer to Hotkey Setting Mode
(HSM) section.
OSD Login
By default, the Login and Password are blanks, so
simply press [Enter] [Enter] to login. If you have set
a user name and password on the KVM, simply
enter them and press enter to login.
OSD Main Screen
When you invoke the OSD, a screen similar to the
one below appears:
24
Notes:
1. The diagram depicts the administrator's main
screen. The user main screen does not show
the F4 and F6 functions, since these are
reserved for the administrator and can't be
accessed by users.
2. The OSD always starts in list view, with the
highlight bar at the same position it was in the
last time it was closed.
3. Only the ports that have been set accessible by
the administrator for the current logged in user
are visible.
4. If there is a
next to the monitor icon, which
means that port is attached to another KVM
(Cascading). Click on a switch number, or
move the highlight bar to it then press the
right arrow key to expand the list. Similarly, to
collapse a switch's port list, click on the switch
number, or move the highlight bar to it then
press the left arrow key to collapse the list.
25
Advertisement
Table of Contents
