Operation - IOGear M1672 User Manual

Operation

Splash screen informtion
SSID: This is the name of the device that you will see when you
do a wireless scan of a wireless network. The GWKIT4K SSID
will start with GWKIT4K-XXXX The name can be changed in
Settings page for your convenience such as Kitchen, Living
Room, etc. to easily remember.
Password: To initially connect to the GWKIT4K wireless
network you will be asked for this password. This password
can also be changed to something that is easy to remember to
you and needs to be 8 characters.
The 3 icons on the right of the password:
This first icon confirms that casting to this device is available.
This icon shows that the receiver of the GWKIT4K is not online
yet.
This shows the receiver of the GWKIT4K is now online. The
wifi signal will turn green. Once a device is connected there
will be a (1) underneath the icon to show that you are using the
receiver of the GWKIT4K as your wireless access point. As you
add more devices the number will increase. Please note that
only 1 device can share the screen.
13